How to Service and Repair the Vapor Canister on 2001 Ford Explorer Sport Trac?

You will need to service the evaporative emission control canister by lifting the door and removing the spare tire and disconnecting the battery ground cable. Unscrew emission lines, loosen bolts and pull out the canister. De-plumb the purge sleeve and vent solenoid. Installation follows the reverse of the process and a leak test is performed. Lubricate O-ring seals.

OEM 2001 Ford Explorer Sport Trac Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vapor Canister found

View related parts
2001 Ford Explorer Sport Trac Vapor Canister Part Number: F5OZ-9D653-AA
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 2.00 Pounds
- Item Dimensions: 9.5 x 5.8 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5OZ-9D653-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Explorer Sport Trac Submodels:
- Base, XL, XLS, XLT | 6 Cyl 4.0 L GAS

2001 Ford Explorer Sport Trac Vapor Canister

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Explorer Sport Trac Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Explorer Sport Trac Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Explorer Sport Trac Vapor Canister Parts Q&A

Q: How to Service and Repair the Vapor Canister on 2001 Ford Explorer Sport Trac?
A: You will need to service the evaporative emission control canister by lifting the door and removing the spare tire and disconnecting the battery ground cable. Unscrew emission lines, loosen bolts and pull out the canister. De-plumb the purge sleeve and vent solenoid. Installation follows the reverse of the process and a leak test is performed. Lubricate O-ring seals.