How to service and repair the windshield washer reservoir on 2001 Ford Explorer?

A person should start by draining the reservoir to avoid spills by disconnecting the windshield washer hose from the windshield washer pump before servicing and repairing the windshield washer reservoir. The first step in servicing the reservoir involves disconnecting the coolant overflow hose from its location at the engine coolant reservoir before plugging the outlet opening. The next procedure requires users to detach the electrical connector that powers the windshield washer reservoir pump and the low-level washer fluid electronic sensor when it exists. Begin by removing the engine air cleaner while also unfastening two screws and two nuts mounting the windshield washer reservoir until you extract both items and the windshield washer pump without damage to any rubber grommet. The windshield washer reservoir and windshield washer pump must be installed separately according to the removal procedure in reverse order.

OEM 2001 Ford Explorer Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Washer Reservoirs found

View related parts
2001 Ford Explorer Recovery Tank, Front Part Number: F57Z-17618-AA
$52.28 MSRP: $70.55
You Save: $18.27 (26%)
ADD TO CART
Product Specifications
- Other Name: Reservoir - Water; Washer Fluid Reservoir, Front; Windshield Washer Reservoir; Coolant Reservoir; Washer Reservoir; Reservoir
- Position: Front
- Base No.: 17618
- Item Weight: 4.40 Pounds
- Item Dimensions: 16.2 x 14.8 x 14.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F57Z-17618-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Explorer Submodels:
- Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
2001 Ford Explorer Washer Reservoir, Front Part Number: F77Z-17618-A
$62.62 MSRP: $86.63
You Save: $24.01 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir, Front; Windshield Washer Reservoir; Coolant Reservoir; Reservoir
- Position: Front
- Replaces: F57Z-17618-BA
- Base No.: 17618
- Item Weight: 3.30 Pounds
- Item Dimensions: 9.5 x 13.1 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F77Z-17618-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Explorer Submodels:
- Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS

2001 Ford Explorer Washer Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Explorer Washer Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Explorer Washer Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Explorer Washer Reservoir Parts Q&A

Q: How to service and repair the windshield washer reservoir on 2001 Ford Explorer?
A: A person should start by draining the reservoir to avoid spills by disconnecting the windshield washer hose from the windshield washer pump before servicing and repairing the windshield washer reservoir. The first step in servicing the reservoir involves disconnecting the coolant overflow hose from its location at the engine coolant reservoir before plugging the outlet opening. The next procedure requires users to detach the electrical connector that powers the windshield washer reservoir pump and the low-level washer fluid electronic sensor when it exists. Begin by removing the engine air cleaner while also unfastening two screws and two nuts mounting the windshield washer reservoir until you extract both items and the windshield washer pump without damage to any rubber grommet. The windshield washer reservoir and windshield washer pump must be installed separately according to the removal procedure in reverse order.