OEM 2001 Ford Mustang A/C Condenser

2001 Ford Mustang A/C Condenser Parts Questions & Experts Answers

• Q: How to Service and Repair the A/C Condenser on 2001 Ford Mustang?

  A: Before removing the HVAC condenser to perform repairs and servicing the vehicle owner should first test for leaks in the A/C condenser core. Before starting work disconnect the battery power and carry out the Refrigerant Discharging and Recovery Procedure steps. Start by removing the battery tray bolts and then proceed to take out the radiator sight shield after removing its pin-type retainers. Begin by removing the shield together with the bolts and finally extracting the bracket and bottle from its position. Detach the cooling fan electrical plug and place the electrical wire to the side. Disconnect the lines after removing their nuts followed by radiator bracket removal and their corresponding bolts. The radiator needs a backward placement before removing its four pin-type retainers and moving the wiring harness toward the rear. To complete removal you must take out the condenser core by removing its bolts. Installation requires a reverse application of removal procedures while adding 30 ml (1 oz.) PAG Compressor Oil YN-12c F7AZ-19589-DA or an equivalent oil which conforms to Ford specification WSH-M1C231-B to the A/C condenser. The process continues by applying the same PAG Compressor Oil to lubricate the O-ring seal.