FordParts
My Garage
My Account
Cart
OEM 2000 Ford Mustang A/C Condenser
Air Conditioning Condenser- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Condensers found
2000 Ford Mustang Condenser Part Number: 1R3Z-19712-CA
Product Specifications- Other Name: Condenser Assembly; A/C Condenser
- Replaces: F8ZZ-19712-BA
- Base No.: 19712
- Item Weight: 8.80 Pounds
- Item Dimensions: 33.7 x 21.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1R3Z-19712-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Mustang Condenser Part Number: 3R3Z-19712-AA
Product Specifications- Other Name: Condenser Assembly; A/C Condenser
- Base No.: 19712
- Item Weight: 12.20 Pounds
- Item Dimensions: 33.0 x 6.0 x 21.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3R3Z-19712-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Mustang A/C Condenser
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Mustang A/C Condenser available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Mustang A/C Condenser as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Mustang A/C Condenser Parts Q&A
- Q: How to properly service and repair an A/C Condenser on a 2000 Ford Mustang?A: A leak test must happen before A/C condenser removal as a first step of repair work. Service and repair of the A/C condenser starts with battery disconnection. The service begins with executing the necessary steps of Refrigerant Discharging and Recovery Procedure. Start by extracting the bolts which detach the battery tray after you remove the radiator sight shield by unfastening its pin-type retainers. Start by unfastening the bracket along with the bottle using bolts and proceed to separate the cooling fan electrical connector before putting the harness off to the side. Work on disconnecting lines by unscrewing their nuts then you can take out the radiator brackets after freeing the bolts. The radiator needs to be positioned in the back before removing the four pin-type retainers from the walls. Once the retainers are gone reposition the wiring harness towards the rear. Unfasten the condenser bolts after which extract the condenser core. Reverse the removal steps while installing the A/C condenser by adding 30 ml (1 oz.) of PAG Compressor Oil, YN-12c, F7AZ-19589-DA or a suitable oil that fulfills Ford specification WSH-M1C231-B. When lubricating the O-ring seal you should use the same PAG Compressor Oil.