FordParts
My Garage
My Account
Cart
OEM 2001 Ford Ranger Blend Door Actuator
Air Blend Door Actuator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Blend Door Actuator found
2001 Ford Ranger Motor Assembly Part Number: YL5Z-19E616-AA
$42.48 MSRP: $68.55You Save: $26.07 (39%)Product Specifications- Other Name: HVAC Air Inlet Door Actuator; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Blower Motor; Actuator
- Replaces: F87Z-19E616-BA
- Base No.: 19E616
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.6 x 7.6 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL5Z-19E616-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Ranger Blend Door Actuator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Ranger Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Ranger Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford Ranger Blend Door Actuator Parts Q&A
- Q: How to service the Blend Door Actuator on 2001 Ford Ranger?A: Service of the blend door motor starts by turning the temperature control knob to COOL position then removing the passenger air bag module. You must separate anti-theft/keyless entry modules by removing their screws when they are present on vehicles. Detach and place to the side both the electrical connector and RH demister hose. detach the temperature blend door control cable after releasing its two clips before taking out the defroster opening grill. You must access the area by the RH defroster nozzle to remove the screw and after that remove the screws attaching the temperature blend door actuator before removing the actuator. You should implement the reverse actions of installation while ensuring the control shaft of any new temperature blend door actuator faces the complete COOL position.