OEM 2001 Ford Ranger A/C Condenser

2001 Ford Ranger A/C Condenser Parts Questions & Experts Answers

• Q: How to service and repair the A/C Condenser on 2001 Ford Ranger?

  A: The HVAC condenser servicing and repair process starts with leak testing the condenser core when leak detection is suspected before component removal. The suction accumulator needs replacement only when physical system contamination appears due to failed A/C compressor or suction accumulator damage. Every maintenance sequence must start with execution of the Refrigerant Discharging and Recovery Procedure. You must detach the condenser to evaporator line from the condenser core while you eliminate the O-ring seal. Keep the condenser core connected to the compressor manifold and tube assembly before throwing away the O-ring seal while doing so. After screw removal the radiator can tilt back and the pin-type retainers with top seal will become accessible for removal. To access the condenser core you need to safely detach all screws it has first and potentially dismount the radiator from its mounting saddles throughout the operation. Replace the condenser with the installation instructions while using the required amount of clean PAG oil or equivalent to lubricate the system and install new O-ring seals which also need lubrication using clean PAG oil or equivalent. Finish the work by performing evacuation followed by leak detection and filling the refrigerant system.