FordParts
My Garage
My Account
Cart
OEM 2001 Ford Taurus Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Vapor Canister found
2001 Ford Taurus Vapor Canister Part Number: F6DZ-9D653-BA
$163.54 MSRP: $269.09You Save: $105.55 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 3.70 Pounds
- Item Dimensions: 3.7 x 12.3 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6DZ-9D653-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Taurus Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Taurus Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Taurus Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford Taurus Vapor Canister Parts Q&A
- Q: How to Service and Repair the Vapor Canister on 2001 Ford Taurus?A: Start all evaporative emission control canister servicing and repair by disconnecting the battery ground cable to limit electrical sparks which could ignite fuel vapors leading to dangerous fire and explosion. The service technician must first raise the vehicle while providing support before proceeding to disconnect the evaporative canister tube as well as the evaporative emission (EVAP) canister purge outlet tube from its corresponding tubes. Higher flammability makes it essential to stay away from all smoking activities and open flame usage during this operation. The first step involves disconnecting EVAP canister vent solenoid electrical connector before extracting the EVAP canister with its bracket assembly by unfastening the securing nuts. You will disconnect the solenoid to the EVAP canister bracket while removing the inlet and outlet tubes of the EVAP canister. Starting the installation by undoing removal steps and performing a leak test then execute the evaporative emission repair verification drive cycle. The installation of the Merpol(R) O-ring seal lubricant which fulfills Ford specification ESE-M99B144-B or equivalent is essential for lubricating O-ring seals.