How to service and repair the oil pan on 2001 Ford Windstar?

Keep parts clean when servicing the oil pan to prevent contamination and engine failure. Remove Y-pipe and starter, drain oil, remove cover and bolts, then oil pan and transmission bolts. Clean, seal mating surfaces, install rear seal, tighten bolts sequentially, reinstall covers, drain plug and starter, refill with clean oil.

OEM 2001 Ford Windstar Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pan found

View related parts
2001 Ford Windstar Oil Pan Part Number: 1F2Z-6675-BA
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Manufacturer Note: Use RTV Silicone Sealer In Place Of Gasket For This Application. Refer To Workshop Manual For Specification
- Replaces: 1F2Z-6675-AA, 5F2Z-6675-A
- Base No.: 6675
- Item Weight: 9.70 Pounds
- Item Dimensions: 9.8 x 19.2 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F2Z-6675-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Windstar Submodels:
- Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.8 L GAS

2001 Ford Windstar Oil Pan

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Windstar Oil Pan available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Windstar Oil Pan as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Windstar Oil Pan Parts Q&A

Q: How to service and repair the oil pan on 2001 Ford Windstar?
A: Keep parts clean when servicing the oil pan to prevent contamination and engine failure. Remove Y-pipe and starter, drain oil, remove cover and bolts, then oil pan and transmission bolts. Clean, seal mating surfaces, install rear seal, tighten bolts sequentially, reinstall covers, drain plug and starter, refill with clean oil.