FordParts
My Garage
My Account
Cart
OEM 2001 Lincoln LS Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Vapor Canisters found
2001 Lincoln LS Vapor Canister
Part Number: F6DZ-9D653-BA$163.54 MSRP: $269.09You Save: $105.55 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 3.70 Pounds
- Item Dimensions: 3.7 x 12.3 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6DZ-9D653-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Lincoln LS Vapor Canister
Part Number: F5AZ-9D653-A$69.64 MSRP: $116.91You Save: $47.27 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Manufacturer Note: Canister only
- Base No.: 9D653
- Item Weight: 2.00 Pounds
- Item Dimensions: 7.5 x 4.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5AZ-9D653-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Lincoln LS Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Lincoln LS Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Lincoln LS Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Lincoln LS Vapor Canister Parts Questions & Experts Answers
- Q: How to Service and Repair the Vapor Canister on 2001 Lincoln LS?A: The first step in servicing the evaporative emission control canister requires disconnecting the battery ground cable because it reduces the chance for electrical sparks that could cause fuel vapor ignition. Lift the car with assistance before lowering the subframe section to reach the assembly. Remove the canister and bracket assembly by first disconnecting all connectors and hoses and then dissipating the assembly using four bolts. The procedure includes removing both the rivet and the EVAP canister from the hardware. A leak test of the evaporative emission canister assembly should occur before installing it while following the installation sequence in reverse order. The drive cycle for evaporative emission repair verification must be completed as part of the procedure. Before installation of the O-ring seals you must use MERPOL(R) or a material with equivalent specifications as listed in Ford document ESE-M99B144-B.
Related 2001 Lincoln LS Parts
2001 Lincoln LS Catalytic Converter
2001 Lincoln LS EGR Valve
2001 Lincoln LS Muffler
2001 Lincoln LS PCV Valve
2001 Lincoln LS Air Injection Pump
2001 Lincoln LS Canister Purge Valve
2001 Lincoln LS Diverter Valve
2001 Lincoln LS EGR Valve Gasket
2001 Lincoln LS EGR Valve Position Sensor
2001 Lincoln LS Exhaust Manifold Gasket
2001 Lincoln LS Secondary Air Injection Check Valve
2001 Lincoln LS Tail Pipe