FordParts
My Garage
My Account
Cart
OEM 2002 Lincoln LS Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Vapor Canisters found
2002 Lincoln LS Vapor Canister Part Number: F6DZ-9D653-BA
$163.54 MSRP: $269.09You Save: $105.55 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 3.70 Pounds
- Item Dimensions: 3.7 x 12.3 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6DZ-9D653-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln LS Vapor Canister Part Number: F5AZ-9D653-A
$69.64 MSRP: $116.91You Save: $47.27 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Manufacturer Note: Canister only
- Base No.: 9D653
- Item Weight: 2.00 Pounds
- Item Dimensions: 7.5 x 4.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5AZ-9D653-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln LS Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln LS Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln LS Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Lincoln LS Vapor Canister Parts Q&A
- Q: How to Service and Repair the Vapor Canister on 2002 Lincoln LS?A: The battery ground cable disconnect serves as the first step when working with the evaporative emission control canister because it minimizes dangerous electrical spark potentials that could ignite fuel vapors. Beginning with a vehicle lift to gain clearance, users should lower the rear subframe to get to the evaporative emission canister assembly. The service process requires disconnecting hoses and connectors while removing four bolts that secure the bracket canister assembly. When the rivet is removed from the system you should retrieve the Evap canister. Install the evaporative emission canister assembly by following removal step reversal and check for leaks before installation. A verification drive cycle for evaporative emission repair needs to be executed after installation. The O-ring seals must be lubricated with Merpol(R) when installing them.