OEM 2002 Ford Crown Victoria Brake Disc

2002 Ford Crown Victoria Brake Disc Parts Questions & Experts Answers

• Q: How Can You Ensure Proper Brake Disc Service and Repair on 2002 Ford Crown Victoria?

  A: The service process for brake rotor/disc requires front disc brake caliper anchor plate removal as a first step. Mark the brake disc lug hole which corresponds to the wheel stud for reassembly to preserve the minimum brake disc runout. Total Indicated Runout (TIR) measurement will be necessary if excessive force becomes needed to remove the brake disc. Rust Penetrant and Inhibitor F2AZ-19A501-A or another product equivalent to Ford specification ESR-M99C56-A should be applied to brake disc and wheel hub mating surfaces before disc removal when brake disc removal proves difficult. Use Brake Parts Cleaner F6AZ-2C410-AB or an equivalent product to clean both brake disc and wheel hub before and after their removal. High Temperature Nickel Anti-Seize Lubricant F6AZ-9L494-AA which meets Ford specification ESE-M12A4-A serves as the recommended product for application onto the hub flange and pilot area. Position the brake disc onto the wheel hub by aligning the marks which are present on both components. Before final installation check the Total Indicated Runout (TIR) measurement.