How to service and repair the antenna cable on 2002 Ford Expedition?

Service and repair of the antenna cable starts by removing both the right-hand scuff plate together with the right-hand A-pillar lower trim panel. The service and repair of the antenna cable starts with unfastening the two pin-type retainers from the lower A-pillar then removing the rear antenna lead-in cable from the front antenna lead-in cable. Start by removing the front antenna lead-in cable through the process of removing its pin-type retainers from the lower Instrument Panel (I/P) channel followed by pulling the front antenna lead-in cable out from the I/P. You must do the reverse of the removal process during installation.

OEM 2002 Ford Expedition Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Antenna Cables found

View related parts
2002 Ford Expedition Antenna Cable Part Number: 2L1Z-18812-DA
$16.22 MSRP: $22.07
You Save: $5.85 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Base No.: 18812B
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.2 x 9.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-18812-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2002 Ford Expedition Antenna Cable, Front Part Number: 2L1Z-18812-CB
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Manufacturer Note: Attaches To Radio Receiver
- Position: Front
- Base No.: 18812A
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.6 x 5.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-18812-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2002 Ford Expedition Antenna Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Expedition Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Expedition Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Expedition Antenna Cable Parts Q&A

Q: How to service and repair the antenna cable on 2002 Ford Expedition?
A: Service and repair of the antenna cable starts by removing both the right-hand scuff plate together with the right-hand A-pillar lower trim panel. The service and repair of the antenna cable starts with unfastening the two pin-type retainers from the lower A-pillar then removing the rear antenna lead-in cable from the front antenna lead-in cable. Start by removing the front antenna lead-in cable through the process of removing its pin-type retainers from the lower Instrument Panel (I/P) channel followed by pulling the front antenna lead-in cable out from the I/P. You must do the reverse of the removal process during installation.