How to service the rear antenna cable on Ford Expedition?

You must begin the service of the rear antenna lead-in cable by taking off both the right-hand scuff plate and right-hand A-pillar lower trim panel. Begin by detaching the rear antenna lead-in cable from the front antenna lead-in cable then move to take away the right-hand rear door scuff plate followed by the right-hand rear quarter trim. You need to lower the headliner until you can reach the antenna cable connection point to disconnect the rear antenna lead-in cable from its connection at the antenna isolator module. The antenna functions as a part of the wiring harness so replacement alone is not possible; therefore keep the remaining antenna cable section and use tape to secure it to the harness to minimize noise. First separate the ground plate and the antenna cable ends. Secure the new cable installation with tape or wire ties that should be attached to the wiring harness for noise prevention. To finalize installation employees need to reverse all steps from the removal protocol.

How to service and repair the front antenna cable on Ford Expedition?

The service process for front antenna lead-in cable consists of sequential steps that start with removing the audio unit then moving to right-hand scuff plate removal followed by right-hand A-pillar lower trim panel removal. The technician disconnects the rear antenna lead-in cable from its attached connection to the front antenna lead-in cable. The antenna functions as part of the wiring harness so replacement is impossible so cut the old antenna cables and tape the remaining parts to the wiring harness to stop receiving unwanted sounds. The third step involves taking away the ground plate together with the antenna cable endings. The wiring harness should be taped or wire-tied to reduce unnecessary noise during new cable installation. The removal process should be followed in reverse to accomplish the installation.

OEM Ford Expedition Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

32 Antenna Cables found

View related parts
Ford Expedition Antenna Cable Part Number: F65Z-18812-AD
$15.92 MSRP: $22.58
You Save: $6.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly; Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Cable Part Number: NL1Z-19A397-E
$54.73 MSRP: $86.91
You Save: $32.18 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Cable Part Number: JL1Z-19A397-F
$24.09 MSRP: $37.27
You Save: $13.18 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Antenna Cable
- Replaces: JL1Z-19A397-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, Premium, SSV, Timberline, XL, XL STX, XLT | 3.5L V6, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Cable Part Number: NL1Z-19A397-H
$26.44 MSRP: $40.91
You Save: $14.47 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Cable Part Number: NL1Z-19A397-C
$27.38 MSRP: $42.36
You Save: $14.98 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Cable Part Number: JL1Z-19A397-G
$39.26 MSRP: $61.27
You Save: $22.01 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Antenna Cable
- Replaces: JL1Z-19A397-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, Premium, SSV, XL, XLT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Antenna Cable Part Number: JL1Z-14D202-EAA
$74.91 MSRP: $115.28
You Save: $40.37 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly; Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Wire Harness Part Number: ML3Z-10E928-AA
$33.55 MSRP: $47.58
You Save: $14.03 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Splitter - Navigation Fm Antenna; Antenna Cable; Extension
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Wire Harness Part Number: JL1Z-10E928-AA
$38.30 MSRP: $55.75
You Save: $17.45 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Splitter - Navigation Fm Antenna; Radio Wiring Harness
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Antenna Cable Part Number: JL1Z-14D202-FAA
$80.64 MSRP: $117.38
You Save: $36.74 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly; Connector Wire; Cable
- Replaces: JL1Z-14D202-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
- 2018-2019 Ford Expedition | Limited, Premium, XL, XLT | 3.5L V6
View related parts
Ford Expedition Cable Assembly - Extension Part Number: RL1Z-18812-BA
$101.07 MSRP: $147.12
You Save: $46.05 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CABLE ASY - EXTENSION
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2025 Ford Expedition | Active, King Ranch, Max Active, Max King Ranch, Max Platinum, Max SSV, Platinum, SSV, Tremor | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Cable Assembly - Extension Part Number: RL1Z-18812-DA
$105.13 MSRP: $153.03
You Save: $47.90 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CABLE ASY - EXTENSION
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2025 Ford Expedition | Max Active, Max King Ranch, Max Platinum, Max SSV | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition CABLE ASY Part Number: RL1Z-14F662-RA
$52.51 MSRP: $75.12
You Save: $22.61 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2025 Ford Expedition | Active, King Ranch, Max Active, Max King Ranch, Max Platinum, Max SSV, Platinum, SSV, Tremor | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Antenna Cable Part Number: NL1Z-18812-MA
$31.67 MSRP: $44.92
You Save: $13.25 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition CABLE ASY Part Number: RL1Z-14F662-SA
$32.32 MSRP: $45.85
You Save: $13.53 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2025 Ford Expedition | Max Active, Max King Ranch, Max Platinum, Max SSV | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Antenna Cable Part Number: NL1Z-18812-U
$32.58 MSRP: $46.22
You Save: $13.64 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Antenna Cable Part Number: NL1Z-18812-T
$32.74 MSRP: $46.43
You Save: $13.69 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Platinum, SSV, Timberline, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Antenna Cable, Rear Part Number: JL1Z-18812-GB
$59.68 MSRP: $82.57
You Save: $22.89 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Rear
- Position: Rear
- Replaces: JL1Z-18812-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Platinum, Premium, SSV, XL, XLT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Antenna Cable, Front Part Number: 2L1Z-18812-CB
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Manufacturer Note: Attaches To Radio Receiver
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Antenna Cable Part Number: 2L1Z-18812-DA
$16.22 MSRP: $22.07
You Save: $5.85 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

| Page 1 of 2 |Next >

1-20 of 32 Results

Ford Expedition Antenna Cable

OEM Antenna Cable boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Antenna Cable with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Expedition Antenna Cable Parts and Q&A

Antenna Cable
2L1Z-18812-DA
Q: How to service the rear antenna cable on Ford Expedition?
A:
You must begin the service of the rear antenna lead-in cable by taking off both the right-hand scuff plate and right-hand A-pillar lower trim panel. Begin by detaching the rear antenna lead-in cable from the front antenna lead-in cable then move to take away the right-hand rear door scuff plate followed by the right-hand rear quarter trim. You need to lower the headliner until you can reach the antenna cable connection point to disconnect the rear antenna lead-in cable from its connection at the antenna isolator module. The antenna functions as a part of the wiring harness so replacement alone is not possible; therefore keep the remaining antenna cable section and use tape to secure it to the harness to minimize noise. First separate the ground plate and the antenna cable ends. Secure the new cable installation with tape or wire ties that should be attached to the wiring harness for noise prevention. To finalize installation employees need to reverse all steps from the removal protocol.
Antenna Cable
AL1Z-18812-C
Q: How to service and repair the front antenna cable on Ford Expedition?
A:
The service process for front antenna lead-in cable consists of sequential steps that start with removing the audio unit then moving to right-hand scuff plate removal followed by right-hand A-pillar lower trim panel removal. The technician disconnects the rear antenna lead-in cable from its attached connection to the front antenna lead-in cable. The antenna functions as part of the wiring harness so replacement is impossible so cut the old antenna cables and tape the remaining parts to the wiring harness to stop receiving unwanted sounds. The third step involves taking away the ground plate together with the antenna cable endings. The wiring harness should be taped or wire-tied to reduce unnecessary noise during new cable installation. The removal process should be followed in reverse to accomplish the installation.