FordParts
My Garage
My Account
Cart
OEM 2002 Ford Explorer Sport Trac Brake Backing Plate
Brake Dust Shield- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Brake Backing Plates found
Product Specifications- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Brake Dust Shield
- Position: Front Passenger Side
- Base No.: 2K004
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-2K004-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Left, Rear Right; Brake Dust Shield
- Manufacturer Note: Plate asy. - rear wheel brake - LH
- Position: Rear Driver Side
- Base No.: 2211
- Item Weight: 8.00 Pounds
- Item Dimensions: 14.1 x 14.3 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-2212-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Left, Rear Right; Brake Dust Shield
- Manufacturer Note: Plate asy. - rear wheel brake - RH
- Position: Rear Passenger Side
- Base No.: 2211
- Item Weight: 8.30 Pounds
- Item Dimensions: 14.4 x 14.3 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-2211-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Brake Dust Shield
- Position: Front Driver Side
- Base No.: 2K004
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-2K005-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Ford Explorer Sport Trac Brake Backing Plate
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Explorer Sport Trac Brake Backing Plate available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Explorer Sport Trac Brake Backing Plate as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Ford Explorer Sport Trac Brake Backing Plate Parts Q&A
- Q: How to Service and Repair the Brake Backing Plate on 2002 Ford Explorer Sport Trac?A: The servicing process of the backing plate starts with removing the rear brake shoes and linings. The lever for parking brake needs to be disconnected by pulling back the parking brake cable spring. The following steps should be taken if the axle shaft requires removal along with the hub. A compressed cable retainer will draw the parking brake rear cable and conduit out of the brake backing plate. Finish the rear wheel cylinder removal by disconnecting the brake line fitting while removing the two bolts which secure the cylinder. The removal procedure starts with removing the rear wheel cylinder then continuing with the removal of the four backing plate-to-axle flange nuts and bolts to separate the brake backing plate. The backing plate installation process should begin by following the reversal of removal steps along with brake system bleeding.