OEM 2002 Ford Explorer Sport Trac Ignition Lock Cylinder

2002 Ford Explorer Sport Trac Ignition Lock Cylinder Parts Questions & Experts Answers

• Q: How to service and repair a non-functional Ignition Lock Cylinder on 2002 Ford Explorer Sport Trac?

  A: The procedure for repairing a malfunctioning ignition switch lock cylinder begins with both wheels in straight-ahead position followed by disconnecting the battery ground cable then waiting one minute. The process of inspecting and installing the steering wheel requires following safety directions and all instructions listed in the warning section. Start by removing the steering wheel assembly followed by rotating off the cap from the ignition switch cylinder. The repair process for lock cylinders involves discarding the nonfunctioning unit and implementing the relevant lock repair package that includes step-by-step guidelines to establish a replacement cylinder which corresponds to the existing vehicle key code. To extract the ignition switch lock cylinder you should first drill out the lock cylinder retaining pin with a 1/8-inch diameter drill bit followed by drilling through the center of the ignition lock key slot with a 3/8-inch drill bit until the ignition switch lock cylinder becomes loose. The old ignition switch lock cylinder should be discarded after cleaning the drill shavings from the steering column completely. After bearing retainer removal the operator should remove the bearing and gear while inspecting the steering column for any damage before cleaning all drill shavings. The installation process can be finished by installing a new ignition switch lock cylinder then checking its functioning capability.