OEM 2002 Ford Focus Brake Master Cylinder

2002 Ford Focus Brake Master Cylinder Parts Questions & Experts Answers

• Q: How to service and repair the brake master cylinder on 2002 Ford Focus?

  A: The procedure for brake master cylinder service requires first disconnecting the battery ground cable followed by electrical connector detachments from the filler cap using tab pullback and clips press. Service brake fluid reservoir filler caps by extracting them but keep contamination out of the cap. First loosen front wheel nuts after which you must raise and support the vehicle before driving out the wheels. The bleeding process begins by removing the dust cap from the bleed nipple and following with the nipple loosening step. A suitable container attached to the bleed nipple will receive brake fluid as you pump the brake pedal until fluid stops flowing. Finally, tighten the bleed nipple. Place the brake fluid reservoir back onto the correct position after lowering the vehicle. Moving forward with the process requires removing first the central electrical box from its outlet tube along with the air cleaner. Use a screw to detach the electrical connection of the central box before moving it to the air cleaner position. The brake fluid feed tube requires disconnection through tube caps to stop fluid loss and prevent dirt contamination of the tubes. The brake tube connections of vehicles with anti-lock brakes should always receive closure caps. The vacuum pipe should be disassembled from the brake booster before master cylinder extraction. When installing the vacuum seal should face outward and the mating surfaces must be clean before installation. Bleed the brake system by performing the removal process in reverse order.