How to service the rear bumper cover on a wagon on 2002 Ford Taurus?

Service of the rear bumper cover for the wagon begins by detaching the load space trim panel and spare tire. First remove all left-hand rear bumper cover to rear quarter panel nuts and right-hand rear bumper cover panel nuts then proceed with rear bumper cover nuts removal. Apply vehicle support with lift equipment to expose four splash shield screws along with two pin-type retainers which can be placed out of the way to reveal rear bumper cover fastening bolts. The two rear bumper cover to rear quarter panel nuts plus pin-type retainers need removal before disconnecting the drain tube and removing all rear bumper cover screws. Before taking out the rear bumper cover it is essential to disconnect the rear side marker light connector from its position between the cover and the body. The installation of the new cover requires execution of the reverse removal steps.

OEM 2002 Ford Taurus Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Bumpers found

View related parts
2002 Ford Taurus Bumper Cover, Rear Part Number: 2F1Z-17K835-CA
$100.60 MSRP: $136.89
You Save: $36.29 (27%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: YF1Z-17K835-BB
- Base No.: 17K835
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-17K835-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2002 Ford Taurus Impact Bar, Rear Part Number: YF1Z-17906-AB
$63.01 MSRP: $85.75
You Save: $22.74 (27%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Bar
- Manufacturer Note: Steel
- Position: Rear
- Replaces: XF1Z-17906-AA
- Base No.: 17906
- Item Weight: 15.20 Pounds
- Item Dimensions: 5.8 x 5.6 x 48.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-17906-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2002 Ford Taurus Impact Bar, Front Part Number: 1F1Z-17757-AA
$88.99 MSRP: $123.11
You Save: $34.12 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front; Bar
- Position: Front
- Replaces: YF1Z-17757-AB
- Base No.: 17757
- Item Weight: 14.50 Pounds
- Item Dimensions: 53.7 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2002 Ford Taurus Bumper Cover, Front Part Number: 2F1Z-17D957-BA
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match, It may also be necessary to order any color 2F1Z 8200 grille & paint to match
- Position: Front
- Replaces: YF1Z-17D957-BA
- Base No.: 17D957
- Item Weight: 12.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-17D957-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2002 Ford Taurus Impact Bar, Rear Part Number: YF1Z-17906-BA
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Bar
- Position: Rear
- Base No.: 17906
- Item Weight: 14.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-17906-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Taurus Submodels:
- GL, LX, SE, SE Comfort, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2002 Ford Taurus Bumper Cover, Rear Part Number: 2F1Z-17K835-DA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: YF1Z-17K835-BA
- Base No.: 17K835
- Item Weight: 10.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-17K835-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Taurus Submodels:
- SE, SE Comfort, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2002 Ford Taurus Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Taurus Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Taurus Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Taurus Bumper Parts Q&A

Q: How to service the rear bumper cover on a wagon on 2002 Ford Taurus?
A: Service of the rear bumper cover for the wagon begins by detaching the load space trim panel and spare tire. First remove all left-hand rear bumper cover to rear quarter panel nuts and right-hand rear bumper cover panel nuts then proceed with rear bumper cover nuts removal. Apply vehicle support with lift equipment to expose four splash shield screws along with two pin-type retainers which can be placed out of the way to reveal rear bumper cover fastening bolts. The two rear bumper cover to rear quarter panel nuts plus pin-type retainers need removal before disconnecting the drain tube and removing all rear bumper cover screws. Before taking out the rear bumper cover it is essential to disconnect the rear side marker light connector from its position between the cover and the body. The installation of the new cover requires execution of the reverse removal steps.