How to remove and install the front bumper cover on all on 2003 Ford Taurus?

The first step for front bumper cover removal on all vehicles requires headlamps removal and vehicle support through lifting. The first step includes unsettling five pin-type retainers located under the chin spoiler and next the air dam can be separated by removing seven screws and three bolts. Unscrew thirteen screws from the splash shields on LH and RH front fenders then dismiss their two pin-type retainers before proceeding to remove the front splash shields. The front bumper cover bolts need to come out while also taking out pin-type retainers and the radiator grille specifically on the Taurus model. The Bumper cover on Sable models needs to be unclipped from the support of the radiator grille opening while fog lamp electrical connectors should only be detached if present. Finish the process by taking out four front bumper cover bolts while directing the bumper cover clip outboard to detach it from the fender before completely removing the front bumper cover. The installation process requires following the opposite steps used for removal.

OEM 2003 Ford Taurus Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Bumpers found

View related parts
2003 Ford Taurus Bumper Cover, Rear Part Number: 2F1Z-17K835-CA
$100.60 MSRP: $136.89
You Save: $36.29 (27%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: YF1Z-17K835-BB
- Base No.: 17K835
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-17K835-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Taurus Impact Bar, Rear Part Number: YF1Z-17906-AB
$63.01 MSRP: $85.75
You Save: $22.74 (27%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Bar
- Manufacturer Note: Steel
- Position: Rear
- Replaces: XF1Z-17906-AA
- Base No.: 17906
- Item Weight: 15.20 Pounds
- Item Dimensions: 5.8 x 5.6 x 48.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-17906-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2003 Ford Taurus Impact Bar, Front Part Number: 1F1Z-17757-AA
$88.99 MSRP: $123.11
You Save: $34.12 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front; Bar
- Position: Front
- Replaces: YF1Z-17757-AB
- Base No.: 17757
- Item Weight: 14.50 Pounds
- Item Dimensions: 53.7 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2003 Ford Taurus Bumper Cover, Front Part Number: 2F1Z-17D957-BA
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match, It may also be necessary to order any color 2F1Z 8200 grille & paint to match
- Position: Front
- Replaces: YF1Z-17D957-BA
- Base No.: 17D957
- Item Weight: 12.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-17D957-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Taurus Impact Bar, Rear Part Number: YF1Z-17906-BA
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Bar
- Position: Rear
- Base No.: 17906
- Item Weight: 14.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-17906-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- GL, LX, SE, SE Comfort, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Taurus Bumper Cover, Rear Part Number: 2F1Z-17K835-DA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: YF1Z-17K835-BA
- Base No.: 17K835
- Item Weight: 10.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-17K835-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- SE, SE Comfort, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2003 Ford Taurus Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Taurus Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Taurus Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Taurus Bumper Parts Q&A

Q: How to remove and install the front bumper cover on all on 2003 Ford Taurus?
A: The first step for front bumper cover removal on all vehicles requires headlamps removal and vehicle support through lifting. The first step includes unsettling five pin-type retainers located under the chin spoiler and next the air dam can be separated by removing seven screws and three bolts. Unscrew thirteen screws from the splash shields on LH and RH front fenders then dismiss their two pin-type retainers before proceeding to remove the front splash shields. The front bumper cover bolts need to come out while also taking out pin-type retainers and the radiator grille specifically on the Taurus model. The Bumper cover on Sable models needs to be unclipped from the support of the radiator grille opening while fog lamp electrical connectors should only be detached if present. Finish the process by taking out four front bumper cover bolts while directing the bumper cover clip outboard to detach it from the fender before completely removing the front bumper cover. The installation process requires following the opposite steps used for removal.