FordParts
My Garage
My Account
Cart
OEM 2002 Ford Thunderbird Fuel Filler Hose
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fuel Filler Hoses found
2002 Ford Thunderbird Filler Hose Part Number: XW4Z-9047-AC
Product Specifications- Other Name: Hose - Filler Pipe; Fuel Filler Hose; Lower Hose
- Base No.: 9047
- Item Weight: 1.30 Pounds
- Item Dimensions: 14.7 x 7.8 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-9047-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Ford Thunderbird Tube Assembly Part Number: 3W4Z-9C047-AA
Product Specifications- Other Name: Tube - Fuel Feed; Evaporative Emissions System Lines
- Manufacturer Note: Part Includes 9C052 Pressure Transducer
- Replaces: 2W4Z-9C047-AA
- Base No.: 9C047
- Item Weight: 0.90 Pounds
- Item Dimensions: 31.6 x 18.9 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-9C047-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Ford Thunderbird Fuel Filler Hose
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Thunderbird Fuel Filler Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Thunderbird Fuel Filler Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Ford Thunderbird Fuel Filler Hose Parts Q&A
- Q: What precautions should be taken when servicing the fuel filler hose to prevent personal injury and ensure safe disconnection of components on 2002 Ford Thunderbird?A: Servicing the fuel filler hose requires strict avoidance of smoking alongside any usage of lighted tobacco items or open flames because highly flammable mixtures present in this area can lead to personal injuries from ignition. The fuel system operates at high pressure after engine shutdown thus requiring the pressure relief before disconnecting any fuel system parts to minimize fuel sprays. First disconnect the battery ground cable then drain fuel system pressure and remove at least half of the fuel tank content. First separate the fuel filler cap along with the fuel filler neck housing bolts. You should elevate the vehicle then remove right rear inner wheelwell pin-type retainers along with screws which keep the splash shield in place. Release the bolt which holds the filler pipe before easing the hose clamp at the fuel tank filler pipe and disconnecting the pipe and draining residual fuel to an approved receptacle. Remove the filler pipe completely through the wheelwell opening as the last step. Fluorinated oil called Merpol (R) should be used to lubricate the fuel tank filler pipe end before installation when following the reverse order of removal procedures.