FordParts
My Garage
My Account
Cart
OEM 2002 Ford Thunderbird Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Parking Brake Cables found
2002 Ford Thunderbird Front Cable Part Number: XW4Z-2853-AA
Product Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Base No.: 2853
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-2853-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W4Z-2A635-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Base No.: 2A635
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W4Z-2A635-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Ford Thunderbird Parking Brake Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Thunderbird Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Thunderbird Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Ford Thunderbird Parking Brake Cable Parts Q&A
- Q: How to service and repair the front parking brake cable on 2002 Ford Thunderbird?A: You should start the front parking brake cable service by first taking out the console assembly and pulling the tab slide handle up. The parking brake control requires attention due to its spring tension on the tension arm that may result in accidental injuries. The screwdriver tool serves to lower and flatten the tension arm before releasing the screwdriver during the process. The conduit retainer needs to be depressed with a 13 mm box-end wrench while removing the cable anchor pin to separate the parking brake cable from the control. First lift the vehicle before disassembling rear parking brake cables from their position and taking out the equalizer. Stop the front cable grommet from the floor by snapping it out while removing the cable from its installation position. Mechanics wire should be tied to the old cable and conduit to help with the new cable installation. Using a 13 mm box-end wrench to depress the conduit retaining prongs enables the removal of parking brake cable and conduit. The last step for installation requires following the opposite sequence of removal actions.