How to service and repair the air suspension compressor on 2002 Lincoln Blackwood?

When servicing the air suspension compressor, be sure there is no pressure in the air spring when removing it to prevent injury. Vent the assembly using NGS Tester, remove the battery and washer pump. Unplug the air line and electrical connector and take out the compressor. Carefully reinstall, observe possible drive symptoms. After that inflate the system.

OEM 2002 Lincoln Blackwood Air Suspension Compressor

Suspension Levelling Compressor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Suspension Compressor found

View related parts
2002 Lincoln Blackwood Compressor Part Number: 1L1Z-5319-BA
Product Specifications
- Other Name: Compressor - Suspension Leveling; Air Suspension Compressor; Air Compressor; Compressor - Suspension Levelling
- Manufacturer Note: Mounting kit is 4L1Z-5Z205-AA, 4x2 - less rear load leveling, FROM 2/2/02
- Base No.: 5319
- Item Weight: 9.90 Pounds
- Item Dimensions: 13.5 x 12.6 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L1Z-5319-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln Blackwood Submodels:
- Base | 8 Cyl 5.4 L GAS

2002 Lincoln Blackwood Air Suspension Compressor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln Blackwood Air Suspension Compressor available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln Blackwood Air Suspension Compressor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Lincoln Blackwood Air Suspension Compressor Parts Q&A

Q: How to service and repair the air suspension compressor on 2002 Lincoln Blackwood?
A: When servicing the air suspension compressor, be sure there is no pressure in the air spring when removing it to prevent injury. Vent the assembly using NGS Tester, remove the battery and washer pump. Unplug the air line and electrical connector and take out the compressor. Carefully reinstall, observe possible drive symptoms. After that inflate the system.