FordParts
My Garage
My Account
Cart
OEM 2002 Lincoln Blackwood Seat Switch
Seat Adjust Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Seat Switches found
2002 Lincoln Blackwood Control Switch, Front Part Number: 1L2Z-14A701-AA
$45.80 MSRP: $72.73You Save: $26.93 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Switch Assembly; Power Seat Switch, Front; Seat Lumbar Switch, Left; Power Seat Switch, Left; Power Seat Switch; Seat Switch; Switch Assembly Harness; Adjuster Switch; Switch
- Position: Front
- Base No.: 14A701
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.7 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-14A701-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln Blackwood Switch Assembly Part Number: F5TZ-14776-AA
Product Specifications- Other Name: Power Seat Switch; Seat Switch; Memory Switch
- Manufacturer Note: Front LH Door
- Base No.: 14776
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5TZ-14776-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln Blackwood Seat Switch
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln Blackwood Seat Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln Blackwood Seat Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Lincoln Blackwood Seat Switch Parts Q&A
- Q: How should one service and repair the power seat switch while ensuring safety when working on an air bag supplemental restraint system (SRS) on 2002 Lincoln Blackwood?A: Service and repair of power seat switches requires safety glasses for working on vehicles equipped with air bag supplemental restraint system (SRS) to protect against potential dangerous deployment incidents. Start any front or side SRS component service by disconnecting the battery ground cable then verifying the back up power supply depletion after waiting one minute before disconnecting auxiliary batteries and power supplies. Executables will handle the SRS deactivation procedure properly. Start by removing the affected seat through these steps: remove its screw then unfasten the seat latch handle and detach the seat control and climate control switch electrical connectors at the seat cushion frame front underside. Remove all screws then the pin-type retainer and side shield from the seat cushion frame along with the power lumbar switch disconnection and unharnessing of wires through the frame. Finish the installation by unscrewing the seat control switch which remains on the side shield. The SRS must be reactivated during installation followed by a check for proper operation of the active restraint system once all diagnostic tools are removed from the vehicle because these tools are for service purposes only and must not be left inside during driving to protect safety standards.