OEM 2002 Lincoln LS Brake Pads

2002 Lincoln LS Brake Pads Parts Questions & Experts Answers

• Q: How to service and repair the front brake pads on 2002 Lincoln LS?

  A: Start by checking the reservoir brake fluid and removing it to halfway capacity. Next remove the brake master cylinder filler cap. The first step requires you to remove both wheel and tire. When handling the brake caliper avoid using the sight hole to retract pistons because such action can harm them. Always maintain safe and structured suspension for the brake caliper instead of relying on the brake hose for support. You should detach the caliper by dislodging its caliper bolts before raising it from the caliper anchor plate. The installation of new pads should only occur when they reach the established thickness measurements above the metal backing plate or rivets and should always involve complete axle sets. Before pad removal measure the brake disc thickness against specifications. Replace brake disc if it does not meet specifications. After pad inspection replace and compare thickness measurements to specifications. New brake disc installation will be necessary if measurements show out of specification. A detailed examination should be conducted on the caliper for leaks or boot damage since caliper disassembly will become necessary in case of identification of such issues. During the examination verify the anchor plate assembly where guide pin boots appear intact and guide pins show no sign of restriction or damage while replacing defective hardware. A wood block or used pad should be used to safeguard pistons and boots during the process of compressing caliper pistons. Complete the brake system installation by performing the opposite procedure of removal then refilling the master cylinder brake reservoir with brake fluid.