My Garage
Cart

OEM 2002 Lincoln LS Evaporator

A/C Evaporator Core
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Evaporator found

  • 2002 Lincoln LS Evaporator - 6W4Z-19860-A
    2002 Lincoln LS Evaporator Diagram - 6W4Z-19860-A
    View related parts
    Product Specifications
    • Other Name: Core - Air Conditioning Evaporator; A/C Evaporator Core; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator
    • Replaces: XW4Z-19860-AA
    • Base No.: 19860
    • Item Weight: 6.40 Pounds
    • Item Dimensions: 12.4 x 10.2 x 12.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6W4Z-19860-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2002 Lincoln LS Submodels:
    • Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2002 Lincoln LS Evaporator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln LS Evaporator available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln LS Evaporator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Lincoln LS Evaporator Parts Q&A

  • Q: How to service and repair the evaporator core on 2002 Lincoln LS?
    A: Testing for leakage should precede the removal process when investigating evaporator core problems. To begin start with removing both the evaporator core housing and the screws which hold the air inlet housing to the evaporator housing in place. You should detach the housing clip before you can pull apart the housings so you can take out the gasket. The procedure requires removal of the heater/evaporator core housing by pulling the nine screws followed by clip disengagement before evaporator core extraction. You should unplug the fittings before taking out the thermostatic expansion valve. Installation requires executing the opposite steps of removal while applying PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or an equivalent WSH-M1C231-B compliant product on the evaporator's O-ring seal. Use the correct amount of oil to the new evaporator core either as F7AZ-19589-DA (Motorcraft YN-12-C) or WSH-M1C231-B equivalent material.