FordParts
My Garage
My Account
Cart
OEM 2002 Lincoln LS Timing Cover
Engine Timing Cover- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Timing Covers found
2002 Lincoln LS Timing Cover, Front Part Number: XW4Z-6019-CE
Product Specifications- Other Name: Cover - Cylinder Front; Engine Timing Cover; Front Cover
- Position: Front
- Base No.: 6019
- Item Weight: 8.50 Pounds
- Item Dimensions: 9.3 x 16.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-6019-CE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln LS Timing Cover, Front Part Number: 1W4Z-6019-AA
Product Specifications- Other Name: Cover - Cylinder Front; Front Cover
- Position: Front
- Base No.: 6019
- Item Weight: 11.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W4Z-6019-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln LS Timing Cover
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln LS Timing Cover available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln LS Timing Cover as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Lincoln LS Timing Cover Parts Q&A
- Q: How to Service and Repair the Engine Front Timing Cover on 2002 Lincoln LS?A: The service procedure for engine front cover starts with removing right-hand (RH) valve cover followed by left-hand (LH) valve cover. The service requires removal of both the belt idler pulley and water pump. Then detach the upper and lower radiator hoses. The following sequence must be performed: remove the oil pan followed by the power steering pump and the hydraulic cooling fan pump. Finish the procedure with removal of the bolt and the belt tensioner and then handle the crankshaft front oil seal and its bracket. First disconnect the electrical connectors of the CMP sensor and CKP sensor before you remove the engine front cover bolts with the fuel supply manifold bolt while discarding both the gasket material. Install the engine front cover with inserted dots of silicone gasket and sealant to designated areas within a four-minute window after sealer application. The installation requires a new gasket followed by correct placement of the front cover with sequential bolt torquing. Nuts for the fuel supply manifold should be tightened with the CKP and CMP sensors receiving their electrical connectors. The bracket and crankshaft front oil seal installation will follow. The hydraulic cooling fan pump and power steering pump must be installed after put in the belt tensioner and its bolt. Begin by installing the oil pan then attach lower and upper radiator hoses during the process of water pump installation alongside belt idler pulley installation. The cooling system needs to be filled after reinstalling both the LH and RH valve covers.