How to Service and Repair the Motor and Transmission Mount on the AX4S on 2002 Mercury Sable?

Begin the repair process for AX4S transmission mount by lifting the vehicle and removing its LH wheel together with the tire. Apply a high lift transmission jack under the transaxle while maintaining the engine length by preventing engine excess elevation to avoid tripod CV-joint overextension that could result in internal part separation leading to halfshaft failure. The service process requires the transaxle to reach a specific height for removing the transaxle support insulator. Start by uninstalling the bolts and nut followed by raising the unit to detach engine and transaxle support insulator and ultimately remove the rear engine support bracket. First step for installation involves attaching the rear engine support bracket with bolts then adding the engine and transaxle support insulator with loose bolt installation. The technician should lower the transaxle and fully tighten all mount bolts and nuts then position the mount before tightening the bolts followed by nuts. Complete the installation by removing the high lift transmission jack and reinstalling both the LH wheel along with its tire.

OEM 2002 Mercury Sable Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Motor And Transmission Mounts found

View related parts
2002 Mercury Sable Rear Mount
Part Number: 4F1Z-6068-BA
$54.94 MSRP: $74.76
You Save: $19.82 (27%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Rear; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Manufacturer Note: 12V
- Position: Rear
- Replaces: YF1Z-6068-AA
- Base No.: 6068
- Item Weight: 2.80 Pounds
- Item Dimensions: 6.1 x 3.7 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Mercury Sable Submodels:
- GS, LS | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2002 Mercury Sable Front Mount
Part Number: YF1Z-6038-AA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator; Engine Mount
- Position: Front
- Base No.: 6038
- Item Weight: 5.10 Pounds
- Item Dimensions: 8.3 x 6.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Mercury Sable Submodels:
- GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2002 Mercury Sable Transmission Mount, Rear
Part Number: 3F1Z-6F063-AA
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount; Engine Mount Torque Strut; Bracket; Transfer Case Mount; Motor Mount; Rear Insulator
- Position: Rear
- Replaces: YF1Z-6F063-AA
- Base No.: 6F063
- Item Weight: 4.10 Pounds
- Item Dimensions: 6.2 x 4.5 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-6F063-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Mercury Sable Submodels:
- GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2002 Mercury Sable Rear Mount
Part Number: YF1Z-6068-AB
Product Specifications
- Other Name: Insulator; Engine Mount, Rear; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Position: Rear
- Replaces: 4F1Z-6068-AA, F6DZ-6068-A
- Base No.: 6068
- Item Weight: 4.10 Pounds
- Item Dimensions: 8.4 x 10.4 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-6068-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Mercury Sable Submodels:
- G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L GAS

2002 Mercury Sable Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Mercury Sable Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Mercury Sable Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Mercury Sable Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount on the AX4S on 2002 Mercury Sable?
A: Begin the repair process for AX4S transmission mount by lifting the vehicle and removing its LH wheel together with the tire. Apply a high lift transmission jack under the transaxle while maintaining the engine length by preventing engine excess elevation to avoid tripod CV-joint overextension that could result in internal part separation leading to halfshaft failure. The service process requires the transaxle to reach a specific height for removing the transaxle support insulator. Start by uninstalling the bolts and nut followed by raising the unit to detach engine and transaxle support insulator and ultimately remove the rear engine support bracket. First step for installation involves attaching the rear engine support bracket with bolts then adding the engine and transaxle support insulator with loose bolt installation. The technician should lower the transaxle and fully tighten all mount bolts and nuts then position the mount before tightening the bolts followed by nuts. Complete the installation by removing the high lift transmission jack and reinstalling both the LH wheel along with its tire.