FordParts
My Garage
My Account
Cart
OEM 2003 Ford E-250 Pinion Bearing
Transmission Pinion Bearing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Pinion Bearings found
2003 Ford E-250 Gear Kit Part Number: F2UZ-4215-B
$367.06 MSRP: $539.00You Save: $171.94 (32%)Product Specifications- Other Name: Pinion - Differential
- Base No.: 4215
- Item Weight: 16.20 Pounds
- Item Dimensions: 13.9 x 2.9 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F2UZ-4215-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford E-250 Gear Kit Part Number: YC2Z-4215-AA
$213.04 MSRP: $331.83You Save: $118.79 (36%)Product Specifications- Other Name: Pinion - Differential
- Manufacturer Note: Axle model 70HD - use with axle #YC25-YA, ZA, 1C24-RA, SA, 2C24-AA, BA, 3C24-AA, BA, 4C24-AA, AB, BA, BB, 6C24-BA, - 2000/
- Base No.: 4215
- Item Weight: 13.70 Pounds
- Item Dimensions: 13.9 x 2.9 x 14.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC2Z-4215-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford E-250 Pinion Bearing
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford E-250 Pinion Bearing available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford E-250 Pinion Bearing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford E-250 Pinion Bearing Parts Q&A
- Q: What Are the Key Steps for Servicing and Repairing the Dana 60 and 70 Pinion Bearing on 2003 Ford E-250?A: The Dana 60 and 70 pinion gear service requires a new pinion shaft oil slinger when bending or mutilation occurs so that the replacement can be installed. Both components of the differential ring gear and pinion system must receive matching numbers before installation which can be inspected by comparing etched figures on these components. The gear contact pattern method should validate the final pinion position on the "button" end of the pinion where etched figures are displayed. Each pinion button shows a zero (0) and either a plus (+) or minus (-) followed by a number to indicate its ideal differential ring gear position for running. The correct dimension of the Model 60/70 axles can be adjusted through shimming behind the inner pinion bearing. To preserve the original differential ring gear and pinion the technician should measure the present position shim thickness and select an identical new shim. Drive pinion position shims come in three thicknesses which include 0.08, 0.13, and 0.25 mm (0.003, 0.005, and 0.010 inch) and their measurement must be done using a micrometer. The installation of a new differential ring gear with pinion requires a shim thickness adjustment based on the comparison of etchings between old and new pinion components. Drive pinions that show m+8 (+3) require 0.08 mm (0.003 inch) fewer shims compared to unetched pins therefore the selected drive pinion position shim needs adjustment downward by this amount. The pinion etched m-8 (-3) will need a 0.08 mm (0.003 inch) increase in shim thickness to meet the proper mounting distance because of the etched value.