FordParts
My Garage
My Account
Cart
OEM 2003 Ford Escape Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Alternators found
2003 Ford Escape Alternator Part Number: 4U2Z-10V346-ANRM
$220.84 MSRP: $374.55You Save: $153.71 (42%)Ships in 1 Business DayProduct Specifications- Other Name: Re-Manufactured Alternator Assembly
- Replaces: 1L8Z-10V346-CBRM, 1L8Z-10346-CB, GL-615, GLV-8615-RM, GLV-8679-RM, 1L8Z-10V346-CCRM
- Item Weight: 14.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U2Z-10V346-ANRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Escape Alternator Part Number: 4U2Z-10V346-DGRM
Product Specifications- Other Name: Re-Manufactured Alternator Assembly
- Replaces: 1L8Z-10V346-ACRM, 4U2Z-10V346-ACRM, GLV-8614-RM, 1L8Z-10346-AB, 1L8Z-10V346-ABRM, GLV-8779-RM, GL-614, GLV-8699-RM
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U2Z-10V346-DGRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Escape Alternator Part Number: 4U2Z-10V346-ACRM
Product Specifications- Other Name: Re-Manufactured Alternator Assembly
- Replaced by: 4U2Z-10V346-DGRM
- Item Weight: 14.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U2Z-10V346-ACRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Escape Alternator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Escape Alternator available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Escape Alternator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Escape Alternator Parts Q&A
- Q: How to service and repair the alternator on 2003 Ford Escape?A: Service and repair of the alternator requires first disconnecting the battery cables. You should start by taking out the right intermediate axle shaft then continue with a removal of the right lower splash shield screws and the pin-type retainer. Turn the accessory drive belt tensioner to the right direction to remove the accessory drive belt. Proceed by first removing the nut then placing the bracket together with wiring harness to the side. Remove the upper generator mounting bolts before the lower generator bolts then set the generator component to one side. Climb through the fender well and disconnect all generator electrical connectors while removing the B+ nut cable and connector and separate the generator mounting bracket with its bolts. Use a generator rotation to create room followed by removing it through the fender well opening. You should uninstall the generator by doing the installation steps in reverse order.