How to service the rear ABS sensor on 2003 Ford Excursion?

The service of the rear ABS sensor begins by disconnecting the battery ground cable followed by vehicle height elevation for maintenance. Clear away all dirt from surrounding the rear ABS sensor before separating it to stop fluid contamination. Upon servicing the rear ABS sensor, users should disconnect its electrical connector and then remove the bolt to extract it from the assembly. The installation process must safeguard the rear axle housing from entering any foreign matter. Examine the axle mounting surface and check the magnetized pole piece of the rear ABS sensor for damage while inspecting the O-ring for replacement if needed. SAE 75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B (or equivalent according to Ford specification WSL-M2C192-A) should be used for light O-ring lubrication during installation of the rear ABS sensor. Partly install the sensor bolt prior to reconnecting the electrical connector while taking care to keep the plastic connector free of force. Proceed with caution when reconnecting the battery ground cable since it may cause abnormal drive symptoms during adaptive strategy relearning that could need at least a 16 km (10 mi) drive.

OEM 2003 Ford Excursion ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Sensors found

View related parts
2003 Ford Excursion ABS Sensor, Front
Part Number: F81Z-2C204-BB
$74.39 MSRP: $122.40
You Save: $48.01 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Speed Sensor; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front
- Base No.: 2C204
- Item Weight: 4.30 Pounds
- Item Dimensions: 7.6 x 2.6 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F81Z-2C204-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2003 Ford Excursion ABS Sensor, Front Passenger Side
Part Number: F81Z-2C204-AD
$64.81 MSRP: $106.64
You Save: $41.83 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Right; ABS Speed Sensor; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: RH, 4x2
- Position: Front Passenger Side
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.5 x 2.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-2C204-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2003 Ford Excursion ABS Sensor, Front Driver Side
Part Number: F81Z-2C205-AD
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Base No.: 2C205
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.5 x 2.5 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-2C205-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2003 Ford Excursion ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Excursion ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Excursion ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Excursion ABS Sensor Parts Questions & Experts Answers

Q: How to service the rear ABS sensor on 2003 Ford Excursion?
A: The service of the rear ABS sensor begins by disconnecting the battery ground cable followed by vehicle height elevation for maintenance. Clear away all dirt from surrounding the rear ABS sensor before separating it to stop fluid contamination. Upon servicing the rear ABS sensor, users should disconnect its electrical connector and then remove the bolt to extract it from the assembly. The installation process must safeguard the rear axle housing from entering any foreign matter. Examine the axle mounting surface and check the magnetized pole piece of the rear ABS sensor for damage while inspecting the O-ring for replacement if needed. SAE 75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B (or equivalent according to Ford specification WSL-M2C192-A) should be used for light O-ring lubrication during installation of the rear ABS sensor. Partly install the sensor bolt prior to reconnecting the electrical connector while taking care to keep the plastic connector free of force. Proceed with caution when reconnecting the battery ground cable since it may cause abnormal drive symptoms during adaptive strategy relearning that could need at least a 16 km (10 mi) drive.