FordParts
My Garage
My Account
Cart
OEM 2003 Ford Excursion Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Vapor Canisters found
2003 Ford Excursion Vacuum Reservoir Part Number: 4C3Z-9E453-AA
$75.57 MSRP: $110.00You Save: $34.43 (32%)Product Specifications- Other Name: Reservoir - Vacuum; Reservoir
- Manufacturer Note: includes check valve at "VAC" port
- Replaces: F7UZ-9E453-LA
- Base No.: 9E453
- Item Weight: 2.10 Pounds
- Item Dimensions: 13.5 x 8.4 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-9E453-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Excursion Vapor Canister Part Number: F75Z-9D653-AC
$164.65 MSRP: $270.91You Save: $106.26 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 3.20 Pounds
- Item Dimensions: 17.3 x 6.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-9D653-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Excursion Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Excursion Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Excursion Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Excursion Vapor Canister Parts Q&A
- Q: How to Service and Repair the Vapor Canister on 2003 Ford Excursion?A: The first step to service the evaporative emission control canister includes disconnecting the battery ground cable because it reduces explosion or fire risks from fuel vapor. Service the evaporative emissions (EVAP) canister purge outlet tube by first disconnecting the electrical connector if it exists then taking off the clamp and tube. The procedure starts with removing the bolt which holds the EVAP canister while you extract the component from its location. First detach the vent solenoid from the EVAP canister when it is equipped then remove the canister elbow. Installation requires following the steps of removal in reverse order while doing a leak test on the EVAP system. A drive cycle for evaporative emission repair verification needs to be conducted. The installation requires Merpol(R) O-ring seal lubricant as per Ford specification ESE-M99B144-B or its equivalent to properly lubricate all O-ring seals located in the evaporative emission system.