FordParts
My Garage
My Account
Cart
OEM 2004 Ford Excursion Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Vapor Canisters found
2004 Ford Excursion Vapor Canister Part Number: F75Z-9D653-AC
$164.65 MSRP: $270.91You Save: $106.26 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 3.20 Pounds
- Item Dimensions: 17.3 x 6.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-9D653-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Ford Excursion Vacuum Reservoir Part Number: 4C3Z-9E453-AA
$75.57 MSRP: $110.00You Save: $34.43 (32%)Product Specifications- Other Name: Reservoir - Vacuum; Reservoir
- Manufacturer Note: includes check valve at "VAC" port
- Replaces: F7UZ-9E453-LA
- Base No.: 9E453
- Item Weight: 2.10 Pounds
- Item Dimensions: 13.5 x 8.4 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-9E453-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Ford Excursion Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Excursion Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Excursion Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2004 Ford Excursion Vapor Canister Parts Q&A
- Q: How to Service the Vapor Canister on 2004 Ford Excursion?A: The first step to service the evaporative emission control canister requires users to disconnect the battery ground cable because fuel vapor poses explosion and fire hazards. As a first step service the evaporative emission control canister by disconnecting the electrical connector followed by removal of the clamp and the evaporative emissions (EVAP) canister purge outlet tube. Next remove the bolt from the EVAP canister before removing it. Detach the canister vent solenoid and remove the EVAP canister elbow when they exist on the system. The installation requires Merpol(R) O-ring Seal Lubricant or an equivalent solution following Ford specification ESE-M99B144-B to lubricate EVAP emission O-ring seals after which the removal process should be followed in reverse order. The EVAP system requires a leak test which must be followed by performing the evaporative emission repair verification drive cycle for assessing proper system functionality.