OEM Ford Excursion Vapor Canister

Ford Excursion Vapor Canister Parts Questions & Experts Answers

• Vacuum Reservoir
  4C3Z-9E453-AA
  Q: How to Service and Repair the Vapor Canister on Ford Excursion?

  A: The first procedure when repairing the Evaporative Emission Control Canister requires disconnecting the battery ground cable to prevent fuel vapor explosions or fires. Proceed with the connector electrical disconnect before removing the clamp and Evaporative Emissions (EVAP) canister purge outlet tube. The next step is to unscrew the bolt which holds the EVAP canister before you extract the canister from the vehicle. Detach the canister vent solenoid before unhooking the EVAP canister elbow when the equipment is present. Installation should follow the opposite order of removal steps while performing an EVAP system leak test before finalizing the process. The vehicle needs to perform the evaporative emission repair verification drive cycle. The proper method involves applying MERPOL(R) O-ring Seal Lubricant as well as equivalent products which maintain Ford specification ESE-M99B144-B while lubricating all evaporative emission O-ring seals.