OEM 2003 Ford Expedition Automatic Transmission Shift Levers

2003 Ford Expedition Automatic Transmission Shift Levers Parts Q&A

• Q: How to Service and Repair Automatic Transmission Shift Levers for the Floor Shift on 2003 Ford Expedition?

  A: The first step for repairing the floor shift automatic transmission shift levers starts with lifting up the Prndl bezel together with the disconnection of the wire harness connector. First, disconnect both Tcs wire harnesses and remove the screw from the handle bezel while sliding the bezel down to lift the assembly from the automatic transmission shift levers. The first step is to place the window regulator control panel to the side before unscrewing the console finish panel followed by removing the left side console access panel. Remove the transmission shift cable from the transmission selector arm then take out the retaining clip which holds the floor shift mechanism in place through the console access. The installation requires you to eliminate floor shift mechanism bolt retention as well as eliminate the wire harness connector. Disassemble the console by removing the floor shift mechanism and successive removal of brake shift interlock actuator and parking brake release mechanism together with harness. Properly extract the wire harness retainers and both screws securing brake shift interlock assembly and parking brake controller. The installation concludes by performing the backward version of the removal steps.