OEM 2003 Ford F-150 Turn Signal Switch

2003 Ford F-150 Turn Signal Switch Parts Questions & Experts Answers

• Q: How to service and repair the turn signal switch on 2003 Ford F-150?

  A: The turn signal switch servicing operation starts with disconnecting the battery ground cable. Service repair on the turn signal switch starts with inserting the ignition key into the lock cylinder then turning it to the RUN position. The release tab of the ignition switch lock cylinder needs to be pushed by a punch tool at the same time as pulling out the cylinder. The next step is to twist the tilt wheel handle as well as the shank before removing both pieces from the system. The gear selector must be positioned at the lowest notch to reach the steering column opening cover while removing those four retaining clips which allows the cover to be uninstalled. Employ a screwdriver to disassemble the upper and lower steering column shrouds by removing their three screws and afterward removing both shrouds. Use a screwdriver to unscrew the two screws holding the multifunction switch before disconnecting its electrical connectors and extraction of the switch. You need to be aware that reconnecting or disconnecting the battery can lead to abnormal drive symptoms while the vehicle learns its adaptive strategy during which you need to drive for at least 16 km (10 mi). The installation process concludes by following the steps of backward removal.