OEM 2002 Ford F-150 Turn Signal Switch

2002 Ford F-150 Turn Signal Switch Parts Questions & Experts Answers

• Q: How to service and repair the turn signal switch on 2002 Ford F-150?

  A: A person can begin the turn signal switch service and repair by disconnecting the ground cable of the battery. The ignition lock cylinder removal starts with placing the ignition key into the lock cylinder then switching it to the RUN position. The ignition switch lock cylinder release tab can be unlocked using a punch tool through the lower steering column shroud hole and the lock cylinder can be removed after that. Twist both the tilt wheel handle and shank after which you can remove them. The gear selector should be moved to its lowest position before you access the cover of the steering column opening by releasing four clips and taking out the cover. You must start by removing the steering column shrouds both upper and lower which require you to detach their respective three screws prior to removing the shrouds. The procedure to eliminate the multifunction switch involves you removing two screws before disconnecting electrical connectors and extracting the switch from its position. The vehicle needs to learn its adaptive strategy after battery disconnection so driving for at least 16 km (10 mi.) may be necessary to avoid abnormal drive symptoms. References to removal instructions will guide the installation procedures.