My Garage
Cart

OEM 2003 Ford Focus Radiator

Cooling Radiator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Radiators found

  • 2003 Ford Focus Radiator - XS4Z-8005-A
    2003 Ford Focus Radiator Diagram - XS4Z-8005-A
    View related parts
    Product Specifications
    • Other Name: Radiator Assembly
    • Replaces: YS4Z-8005-BB
    • Base No.: 8005
    • Item Weight: 11.20 Pounds
    • Item Dimensions: 33.6 x 7.4 x 20.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: XS4Z-8005-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2003 Ford Focus Submodels:
    • LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
  • 2003 Ford Focus Radiator - H2MZ-8005-C
    2003 Ford Focus Radiator Diagram - H2MZ-8005-C
    View related parts
    Product Specifications
    • Other Name: Radiator Assembly
    • Replaces: 5S4Z-8005-AA, 5S4Z-8005-AC, RAD-12
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: H2MZ-8005-C
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following 2003 Ford Focus Submodels:
    • LX, S, SE, SES, ST, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
  • 2003 Ford Focus Radiator - 5S4Z-8005-BC
    2003 Ford Focus Radiator Diagram - 5S4Z-8005-BC
    View related parts
    Product Specifications
    • Other Name: Radiator Assembly
    • Replaces: 5S4Z-8005-BA
    • Item Weight: 10.40 Pounds
    • Item Dimensions: 33.5 x 7.0 x 21.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5S4Z-8005-BC
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2003 Ford Focus Submodels:
    • LX, S, SE, SES, ST, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
  • 2003 Ford Focus Radiator - YS4Z-8005-AA
    2003 Ford Focus Radiator Diagram - YS4Z-8005-AA
    View related parts
    Product Specifications
    • Other Name: Radiator Assembly
    • Manufacturer Note: M/T
    • Base No.: 8005
    • Item Weight: 14.20 Pounds
    • Item Dimensions: 38.5 x 6.4 x 23.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: YS4Z-8005-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2003 Ford Focus Submodels:
    • LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2003 Ford Focus Radiator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Focus Radiator available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Focus Radiator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Focus Radiator Parts Q&A

  • Q: How to service and repair the radiator for the 2.3L engine on 2003 Ford Focus?
    A: A proper process for radiator repair of the 2.3L engine starts with removing the battery's ground cable for service. The vehicle must sit on a hoisting system in neutral position. The service technician should recover the A/C refrigerant before draining the cooling system components. After disconnecting the electronic connector from the horn you should first remove all cooling fan motors and shroud. Thoroughly disconnect the A/C condenser lines by taking out their nuts from the condenser. Separate the radiator upper hose by unfastening its clamp before proceeding to untighten the clamp for the lower hose. The removal process begins by detaching the lower radiator splash shield through its push-type pins. Use a wrench to differentiate the bolts maintaining the lower core support before removing the radiator and condenser assembly together. The procedure begins with removing the condenser loom from the radiator through the process of releasing retaining clips. Perform cooling system bleeding after you fill it then use the reverse order of the removal instructions to finish installation.