How to service and repair the cruise control servo on 2003 Ford Ranger?

In order to service the cruise control servo, disconnect electrical connector and battery ground. Take off the speed control cable cap, and slide the core wire out. Disassemble the servo by loosening the bracket bolt and breaking the bracket. To install, do the reverse, making sure that the rubber seal is installed correctly.

OEM 2003 Ford Ranger Cruise Control Servo

Cruise Control Servo Speed

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Servo found

View related parts
2003 Ford Ranger Cruise Servo Part Number: 6L5Z-9C735-AA
Product Specifications
- Other Name: Servo Assembly - Speed Control; Cruise Control Servo; Servo
- Replaces: 1L5Z-9C735-AA
- Base No.: 9C735
- Item Weight: 3.00 Pounds
- Item Dimensions: 8.0 x 5.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-9C735-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2003 Ford Ranger Cruise Control Servo

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Ranger Cruise Control Servo available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Ranger Cruise Control Servo as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Ranger Cruise Control Servo Parts Q&A

Q: How to service and repair the cruise control servo on 2003 Ford Ranger?
A: In order to service the cruise control servo, disconnect electrical connector and battery ground. Take off the speed control cable cap, and slide the core wire out. Disassemble the servo by loosening the bracket bolt and breaking the bracket. To install, do the reverse, making sure that the rubber seal is installed correctly.