How to Service and Repair the Front Door Latch Assembly on 2003 Ford Ranger?

Service initiation for the front door latch starts with the removal of front door trim panel along with watershield. Start by removing the bolt combined with the door glass run rear channel before disconnecting the front door latch control cylinder rod from the door lock cylinder lever. You should first unclip and remove the exterior door handle actuating rod then proceed to take out front door latch screws. The service technician should disconnect the electrical connectors of the interior lamp switch and door ajar switch and should also disconnect the power door lock actuator electrical connector if it is equipped on the vehicle. To gain access to the front door latch assembly owners must first relocate the door latch and afterwards separate the front door latch cable watershield and cable by cleaving the conduit off of the door latch followed by disconnection. Finish the replacement process by taking out the door latch push button rod. Reinstallation of new elements requires the opposite sequence that was used for removal.

OEM 2003 Ford Ranger Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Door Latch Assemblys found

View related parts
2003 Ford Ranger Latch Assembly, Rear Upper Passenger Side
Part Number: AL5Z-13264A26-B
$88.35 MSRP: $128.60
You Save: $40.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Door Latch Assembly, Rear Right Upper; Door Lock; Lock; Door Latch Assembly
- Position: Rear Upper Passenger Side
- Replaces: 6L5Z-13264A26-AA, F87Z-13264A26-AA, AL5Z-13264A26-A
- Base No.: 264A26
- Item Weight: 1.20 Pounds
- Item Dimensions: 4.6 x 3.0 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL5Z-13264A26-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Ford Ranger Latch Assembly, Rear Upper Driver Side
Part Number: AL5Z-13264A27-B
$86.57 MSRP: $126.02
You Save: $39.45 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Door Latch Assembly, Rear Left Upper; Door Lock; Lock; Door Latch Assembly
- Position: Rear Upper Driver Side
- Replaces: 6L5Z-13264A27-AA, AL5Z-13264A27-A, F87Z-13264A27-AA
- Base No.: 264A27
- Item Weight: 1.20 Pounds
- Item Dimensions: 4.6 x 3.0 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL5Z-13264A27-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Ford Ranger Remote Control, Rear
Part Number: 6L5Z-9943170-A
$56.32 MSRP: $81.98
You Save: $25.66 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control; Tailgate Lock Actuator Motor, Rear
- Position: Rear
- Replaces: 4L5Z-9943170-AB
- Base No.: 43170
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.2 x 4.6 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-9943170-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Ford Ranger Lock, Rear Driver Side
Part Number: F37Z-9943151-A
$113.70 MSRP: $165.50
You Save: $51.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly - Tailgate; Tailgate Latch, Rear Left; Trunk Latch; Door Lock; Latch
- Position: Rear Driver Side
- Base No.: 43151
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.5 x 21.7 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F37Z-9943151-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Ford Ranger Latch Assembly, Passenger Side
Part Number: 3L5Z-10219A64-BAC
$80.64 MSRP: $111.56
You Save: $30.92 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Door Latch Assembly; Door Lock; Lock
- Position: Passenger Side
- Base No.: 219A64
- Item Weight: 3.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L5Z-10219A64-BAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Ford Ranger Lock, Rear Passenger Side
Part Number: 1L5Z-9943150-AA
$103.24 MSRP: $158.88
You Save: $55.64 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly - Tailgate; Tailgate Latch, Rear, Rear Right; Trunk Latch; Door Lock; Latch
- Manufacturer Note: R.H., RH
- Position: Rear Passenger Side
- Replaces: F37Z-9943150-A
- Base No.: 43150
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.4 x 5.3 x 19.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-9943150-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Ford Ranger Latch Assembly, Front Driver Side
Part Number: 2L5Z-10219A65-AB
Product Specifications
- Other Name: Latch; Door Latch Assembly, Front Left; Door Latch Assembly; Door Lock; Lock
- Position: Front Driver Side
- Base No.: 219A65
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.1 x 4.5 x 16.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L5Z-10219A65-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Ford Ranger Latch Assembly, Passenger Side
Part Number: 3L5Z-10219A64-AC
Product Specifications
- Other Name: Latch; Door Latch Assembly; Door Lock; Lock
- Position: Passenger Side
- Base No.: 219A64
- Item Weight: 4.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L5Z-10219A64-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2003 Ford Ranger Door Latch Assembly

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Ranger Door Latch Assembly available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Ranger Door Latch Assembly as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Ranger Door Latch Assembly Parts Questions & Experts Answers

Q: How to Service and Repair the Front Door Latch Assembly on 2003 Ford Ranger?
A: Service initiation for the front door latch starts with the removal of front door trim panel along with watershield. Start by removing the bolt combined with the door glass run rear channel before disconnecting the front door latch control cylinder rod from the door lock cylinder lever. You should first unclip and remove the exterior door handle actuating rod then proceed to take out front door latch screws. The service technician should disconnect the electrical connectors of the interior lamp switch and door ajar switch and should also disconnect the power door lock actuator electrical connector if it is equipped on the vehicle. To gain access to the front door latch assembly owners must first relocate the door latch and afterwards separate the front door latch cable watershield and cable by cleaving the conduit off of the door latch followed by disconnection. Finish the replacement process by taking out the door latch push button rod. Reinstallation of new elements requires the opposite sequence that was used for removal.