My Garage
Cart
Make sure this part fits

Ford 1L5Z-9943150-AA
Lock, Rear Passenger Side

1993-2011 Ford Ranger 1L5Z9943150AA

Customer Questions & Expert Answers (21)
Ford 1L5Z-9943150-AA Lock, Rear Passenger Side
  • Part Description
    Latch Assembly - Tailgate; Tailgate Latch, Rear, Rear Right; Trunk Latch; Door Lock
  • Base No.
    43150
  • Position
    Rear Passenger Side
  • Replaces
    F37Z-9943150-A
  • Manufacturer
    Ford
Make sure this part fits
$103.24 MSRP: $158.88
You Save: $55.64 (36%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1993-2011 Ford RangerEdge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 1L5Z-9943150-AA the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 1L5Z-9943150-AA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What should be done with the tailgate support cables for the 2008 Ford Ranger? Posted by Customer
    A:
    Disconnect the tailgate support cables from the pickup bed strikers.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What electrical connectors need to be disconnected for the 2009 Ford Ranger? Posted by Customer
    A:
    Disconnect the door ajar switch electrical connector and, if equipped, the door lock actuator electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after removing the screws for the 2006 Ford Ranger? Posted by Customer
    A:
    Open the tailgate latch actuating rod retainer and disconnect the actuating rods from the tailgate latch remote control.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Tailgate Latch
    Q:
    How do you complete the installation for the 2006 Ford Ranger? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What electrical connections need to be disconnected for the 2002 Ford Ranger? Posted by Customer
    A:
    Disconnect the electrical connectors for the interior lamp switch, the door ajar switch, and if equipped, the power door lock actuator electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you remove the tailgate latch for the 2001 Ford Ranger? Posted by Customer
    A:
    Unscrew the bolts and detach the latch release link.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What is the first step to service the lower rear door latch for the 2004 Ford Ranger? Posted by Customer
    A:
    Begin by removing the rear door trim panel.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should you do after disconnecting the tailgate latch release link for the 2000 Ford Ranger? Posted by Customer
    A:
    Disconnect the tailgate support cables from the pickup bed strikers.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Tailgate Latch
    Q:
    How do you remove the upper latch for the 2000 Ford Ranger? Posted by Customer
    A:
    First, unscrew the four screws.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What electrical connectors need to be disconnected for the 2001 Ford Ranger? Posted by Customer
    A:
    Disconnect the interior lamp switch and door ajar switch electrical connectors, and if equipped, the power door lock actuator electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you remove the tailgate latch for the 2004 Ford Ranger? Posted by Customer
    A:
    Unscrew the bolts and detach the latch release link.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What is the final step in the removal process for the 2005 Ford Ranger? Posted by Customer
    A:
    Remove the door latch push button rod.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after removing the trim panel for the 2008 Ford Ranger? Posted by Customer
    A:
    Take out the three screws securing the lower rear door latch and position the latch aside.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the next step after removing the rear door trim panel for the 2009 Ford Ranger? Posted by Customer
    A:
    Remove the exterior rear door handle, which involves additional steps related to the exterior rear door handle service and repair.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you remove the tailgate latch for the 2003 Ford Ranger? Posted by Customer
    A:
    Unscrew the bolts and detach the latch release link.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What should be done with the tailgate support cables for the 2009 Ford Ranger? Posted by Customer
    A:
    Disconnect the tailgate support cables from the pickup bed strikers.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What should be done after eliminating slack in the release link for the 2007 Ford Ranger? Posted by Customer
    A:
    Close the latch rod retainer over the thread of the release link.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What is the first step to service and repair the front door latch for the 2008 Ford Ranger? Posted by Customer
    A:
    Begin by removing the front door trim panel and positioning the watershield aside.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you disconnect the door lock cylinder for the 2007 Ford Ranger? Posted by Customer
    A:
    Disconnect the door lock cylinder actuating rod from the front door latch.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What electrical connectors need to be disconnected for the 2003 Ford Ranger? Posted by Customer
    A:
    Disconnect the interior lamp switch and door ajar switch electrical connectors, and if equipped, disconnect the power door lock actuator electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Lock, Rear Passenger Side 1L5Z-9943150-AA Designed for Proper Fit and Performance

The Ford part 1L5Z-9943150-AA Lock, Rear Passenger Side as a genuine Ford Tailgate Latch, Tailgate Lock Actuator Motor, Door Latch Assembly component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 1L5Z-9943150-AA Lock, Rear Passenger Side is used with Ford Ranger models. The original Ford part will bear the manufacturer part number: 1L5Z-9943150-AA and where it is made at Ford. It has been specifically developed to fit the Rear Passenger Side and has the code: 43150.
This component has dimensions of 8.4 x 5.3 x 19.2 inches and its weight is approximately 1.10 Pounds. The part 1L5Z9943150AA is available in New condition while meeting the standards of the product rating. The Latch Assembly - Tailgate; Tailgate Latch, Rear, Rear Right; Trunk Latch; Door Lock belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 1L5Z-9943150-AA can be known as Latch, and it replaces F37Z-9943150-A. The inventory reference for this item is SKU: 1L5Z-9943150-AA. Additional manufacturer-provided details include: R.H., RH. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.