FordParts
My Garage
My Account
Cart
OEM 2003 Ford Ranger EGR Valve
Emissions EGR Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 EGR Valves found
2003 Ford Ranger EGR Valve Part Number: XC2Z-9D475-AB
$54.32 MSRP: $87.64You Save: $33.32 (39%)Product Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: XC2Z-9D475-AA, F7UZ-9D475-A4A
- Base No.: 9D475
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.3 x 4.3 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XC2Z-9D475-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Ranger EGR Valve Part Number: 1L5Z-9D475-AA
$77.90 MSRP: $128.18You Save: $50.28 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Base No.: 9D475
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.5 x 3.4 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-9D475-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Ranger EGR Valve Part Number: XR1Z-9D475-BA
$77.24 MSRP: $127.09You Save: $49.85 (40%)Product Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: 7L5Z-9D475-B, XR1Z-9D475-AB
- Base No.: 9D475
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.2 x 3.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR1Z-9D475-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Ranger EGR Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Ranger EGR Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Ranger EGR Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Ranger EGR Valve Parts Q&A
- Q: How to service the EGR valve on 2003 Ford Ranger?A: A service of the EGR valve starts with draining the cooling system and disconnecting the ground cable from the battery. The EGR valve electrical connector must be detached before the removal of the rear driveshaft. You should remove the bolts that keep the catalytic converter fastened next to the muffler while throwing away the exhaust converter outlet gasket. The support system for transmission jack should match manual or automatic transmission standards during the procedure. Begin by removing the six bolts that secure the crossmember in place at each frame side before you can remove both retaining nuts along with the crossmember itself. Lowen the transmission by enough clearance and then disconnect EGR coolant hose followed by bolt removal of the EGR valve while discarding the gasket. The installation process requires following the opposite order of removal that includes gasket surface cleaning and replacement of gaskets on both parts.