FordParts
My Garage
My Account
Cart
OEM 2003 Ford Windstar Fuel Filler Hose
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fuel Filler Hoses found
2003 Ford Windstar Filler Hose Part Number: F78Z-9324-AB
$2.22 MSRP: $3.07You Save: $0.85 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Hose - Vent; Fuel Filler Hose
- Base No.: 9324
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.0 x 1.1 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F78Z-9324-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Windstar Filler Neck Part Number: 3F2Z-9034-AA
Product Specifications- Other Name: Pipe - Fuel Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Fuel Filler Neck; Filler Pipe
- Item Weight: 1.90 Pounds
- Item Dimensions: 4.5 x 7.2 x 22.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-9034-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Windstar Fuel Filler Hose
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Windstar Fuel Filler Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Windstar Fuel Filler Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Windstar Fuel Filler Hose Parts Q&A
- Q: How to service and repair the fuel filler hose on 2003 Ford Windstar?A: The first step for fuel filler hose repair or servicing requires cutting off the battery ground cable. Prior to draining the fuel tank you must reduce its level to half capacity. Begin service of the fuel filler hose by first detaching the screws and next lifting the vehicle. Remove both the left-hand rear tire along with wheel assembly after which the front edge of the rear wheel well splash shield can be taken off. Detach both the fuel vapor fresh air hose from the filler pipe retaining clip while loosing the filler pipe hose clamp then removing the hose. You can extract the filler pipe assembly after you have taken away its holding bolt. Installation requires carrying out the steps in the opposite order of removal.