How to Service the Rear Shock Absorber and Coil Springs Assembly on 2003 Lincoln Aviator?

The first step in servicing the rear shock absorber and spring assembly is to eliminate the wheel and tire assembly from the vehicle. Stereo direction must be followed when deleting components as illustrated in the accompanying table and picture. Recover the assembly through procedures executed in the opposite direction of the removal steps. The shock absorber and spring assembly removal process includes additional instructions which can be found in the corresponding sub-section about their disassembly and assembly processes. After finishing installation steps the shock absorber-to-lower arm bolt should stay loose until the weight of the vehicle rests on the wheel and tire assemblies.

OEM 2003 Lincoln Aviator Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coil Springs found

View related parts
2003 Lincoln Aviator Coil Spring Part Number: 2C5Z-5560-BA
Product Specifications
- Other Name: Spring - Coil; Coil Springs; Spring
- Base No.: 5560
- Item Weight: 10.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2C5Z-5560-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2003 Lincoln Aviator Coil Spring Part Number: 2C5Z-5560-AA
Product Specifications
- Other Name: Spring - Coil; Coil Springs; Spring
- Base No.: 5560
- Item Weight: 10.50 Pounds
- Item Dimensions: 59.4 x 4.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2C5Z-5560-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2003 Lincoln Aviator Coil Spring, Front Part Number: 2C5Z-5310-BA
Product Specifications
- Other Name: Spring - Front; Coil Springs; Spring
- Position: Front
- Base No.: 5310
- Item Weight: 10.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2C5Z-5310-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2003 Lincoln Aviator Coil Spring, Front Part Number: 2C5Z-5310-AA
Product Specifications
- Other Name: Spring - Front; Coil Springs; Spring
- Position: Front
- Base No.: 5310
- Item Weight: 9.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2C5Z-5310-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS

2003 Lincoln Aviator Coil Springs

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Lincoln Aviator Coil Springs available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Lincoln Aviator Coil Springs as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Lincoln Aviator Coil Springs Parts Q&A

Q: How to Service the Rear Shock Absorber and Coil Springs Assembly on 2003 Lincoln Aviator?
A: The first step in servicing the rear shock absorber and spring assembly is to eliminate the wheel and tire assembly from the vehicle. Stereo direction must be followed when deleting components as illustrated in the accompanying table and picture. Recover the assembly through procedures executed in the opposite direction of the removal steps. The shock absorber and spring assembly removal process includes additional instructions which can be found in the corresponding sub-section about their disassembly and assembly processes. After finishing installation steps the shock absorber-to-lower arm bolt should stay loose until the weight of the vehicle rests on the wheel and tire assemblies.