FordParts
My Garage
My Account
Cart
OEM 2003 Lincoln LS Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Intake Manifolds found
2003 Lincoln LS Intake Manifold Part Number: 4H2Z-9424-AE
Product Specifications- Other Name: Manifold Assembly - Air Intake
- Replaces: 3W4Z-9424-AE
- Base No.: 9424
- Item Weight: 15.30 Pounds
- Item Dimensions: 17.6 x 15.7 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4H2Z-9424-AE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Lincoln LS Intake Plenum Part Number: 3W4Z-9424-DD
Product Specifications- Other Name: Manifold Assembly - Inlet
- Replaces: 3W4Z-9424-DA
- Base No.: 9424A
- Item Weight: 18.40 Pounds
- Item Dimensions: 18.0 x 16.5 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-9424-DD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Lincoln LS Intake Manifold Part Number: 1X4Z-9424-AA
Product Specifications- Other Name: Manifold Assembly - Inlet
- Manufacturer Note: For First Year Warranty, Service Complete Assembly
- Base No.: 9424B
- Item Weight: 1.60 Pounds
- Item Dimensions: 17.8 x 15.7 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 1X4Z-9424-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Lincoln LS Intake Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Lincoln LS Intake Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Lincoln LS Intake Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Lincoln LS Intake Manifold Parts Q&A
- Q: How to service and repair the intake manifold on 2003 Lincoln LS?A: One needs to start the intake manifold repair by disconnecting the battery ground cable then taking out the air cleaner outlet tube. The procedure for draining engine coolant requires extreme caution to stop the engine from getting damaged. The process begins with cowl vent screen along with the engine compartment brace removal followed by fuel line and Exhaust Gas Recirculation (EGR) system module detachment. The sequence in the provided illustrations determines the order of component removal. Execute the opposite steps from removal to accomplish installation. As the engine appearance cover support bracket gets detached the engine wiring harness retainers must be disconnected. The fuel charge manifold removal process begins by disconnecting the fuel injector and RFI suppressor electrical connectors followed by separation of nuts along with the engine wiring harness retainer before removing the nut and the RFI suppressor. Ahead of removing the intake manifold the technician should disconnect throttle body heater hoses but can skip taking off the throttle body and adapter parts during the process. The listed sequence should be followed to remove bolts and studs before the surfaces require cleaning using a plastic scraping tool to protect them from damage. New intake manifold gaskets should be used before you place the intake manifold into position and tighten bolts following a specific order before reattaching the throttle body heater hoses. The installation process for the fuel charge manifold requires the RFI suppressor and nut followed by the engine wiring harness retainer with its attached nuts then reconnect the fuel injector and RFI suppressor electric connectors. The installation process ends with attachment of engine wiring harness retainers to the engine appearance cover support bracket.