How to service and repair the vacuum brake booster on 2003 Lincoln Town Car?

In order to maintain the vacuum brake booster, remove battery ground cable and fluid level sensor. Take out the brake master cylinder and the instrument close-out panel. Make sure that you slide the booster pushrod off the pin of the pedal, then remover the brake booster. Correct installation and reverse process should be made to complete the job.

OEM 2003 Lincoln Town Car Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

View related parts
2003 Lincoln Town Car Brake Booster Part Number: 3W1Z-2005-AA
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Power Booster
- Base No.: 2005
- Item Weight: 10.50 Pounds
- Item Dimensions: 10.1 x 10.5 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-2005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS

2003 Lincoln Town Car Brake Booster

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Lincoln Town Car Brake Booster available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Lincoln Town Car Brake Booster as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Lincoln Town Car Brake Booster Parts Q&A

Q: How to service and repair the vacuum brake booster on 2003 Lincoln Town Car?
A: In order to maintain the vacuum brake booster, remove battery ground cable and fluid level sensor. Take out the brake master cylinder and the instrument close-out panel. Make sure that you slide the booster pushrod off the pin of the pedal, then remover the brake booster. Correct installation and reverse process should be made to complete the job.