OEM 2003 Lincoln Town Car Fuel Rail

2003 Lincoln Town Car Fuel Rail Parts Questions & Experts Answers

• Q: How to service and repair the fuel rail on 2003 Lincoln Town Car?

  A: The first step of fuel rail servicing requires users to stay away from fuel-related components due to their highly flammable mixture content. Proceed with the fuel rail service or repair only after you disconnect the battery ground cable and follow the fuel pressure relief process. The service requires disconnecting fuel hoses followed by removing throttle body and extracting EGR valve from exhaust manifold tube. Start the process by taking out the drive belt and then disconnect the electrical connector alongside the generator harness and harness pin-type retainer before unbolting the generator mounting bracket. To remove the accelerator and speed control cables from the throttle body put aside the spring and screw and release the wires from their crash brackets before laying them aside. The installer disconnects the vacuum hoses and electrical connector and crankcase ventilation tube before removing eight fuel injectors and their respective vacuum hoses from the EVAP canister purge valve. To remove the fuel injection supply manifold with fuel injectors both pieces should first be separated from the studs and crash bracket. The first step for installation requires fuel injector O-rings to receive clean engine oil lubrication before mounting the fuel injection supply manifold and fuel injectors together for installing the studs and crash bracket. Fit the bolt to its position with the stud while attaching the vacuum hose to the EVAP canister purge valve before completing the vacuum hoses and electrical connector installation. First return the crankcase ventilation tube along with connecting all vacuum hoses and electrical connector before securing the eight fuel injectors. Place the accelerator cable and speed control actuator cable on the crash brackets before installing cables and bolts with the return spring. Next, put on the generator mounting bracket and tighten its bolts. The process includes connecter attachment of electrical elements with generator harnesses and pin-type retainer then installing the drive belt before attaching the EGR valve to exhaust manifold tube and throttle body. Conclude the procedure by uniting fuel hoses with battery ground cable reinstallation.