What steps should be taken before servicing the front sway bar link on 2003 Lincoln Town Car?

Start work on front sway bar and link maintenance by disconnecting electrical power from the air suspension system to avoid sudden air spring changes that would affect the vehicle position during operations. The first step requires removing wheel and tire assemblies after which you should disconnect caliper bolts to remove brake pads alongside anchor plate and brake disc. The sway bar links maintain pressure during rebound suspension yet the installation can continue only after suspending the suspension arms with an appropriate jack stand to send pressure from the sway bar links. The hex holding tool on sway bar links enables users to stop stud rotation during the removal process of both nuts that need to be thrown away. Repetition of this procedure will allow the removal of sway bar links and their associated two nuts before their disposal. The completion of this task requires you to discard the four nuts along with both brackets and the sway bar. The reverse procedure will finish the installation process.

OEM 2003 Lincoln Town Car Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2003 Lincoln Town Car Stabilizer Link, Rear
Part Number: 6W1Z-5664-AA
$3.14 MSRP: $4.46
You Save: $1.32 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link Kit; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: F1VY-5664-A
- Base No.: 5664
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6W1Z-5664-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2003 Lincoln Town Car Stabilizer Link, Front
Part Number: 6W1Z-5K484-AA
$61.66 MSRP: $101.45
You Save: $39.79 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Front Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link Kit
- Manufacturer Note: FROM 08/03/05
- Position: Front
- Replaces: 5W1Z-5K484-A
- Base No.: 5K484
- Item Weight: 0.90 Pounds
- Item Dimensions: 2.9 x 1.8 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6W1Z-5K484-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2003 Lincoln Town Car Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Lincoln Town Car Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Lincoln Town Car Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Lincoln Town Car Sway Bar Link Parts Questions & Experts Answers

Q: What steps should be taken before servicing the front sway bar link on 2003 Lincoln Town Car?
A: Start work on front sway bar and link maintenance by disconnecting electrical power from the air suspension system to avoid sudden air spring changes that would affect the vehicle position during operations. The first step requires removing wheel and tire assemblies after which you should disconnect caliper bolts to remove brake pads alongside anchor plate and brake disc. The sway bar links maintain pressure during rebound suspension yet the installation can continue only after suspending the suspension arms with an appropriate jack stand to send pressure from the sway bar links. The hex holding tool on sway bar links enables users to stop stud rotation during the removal process of both nuts that need to be thrown away. Repetition of this procedure will allow the removal of sway bar links and their associated two nuts before their disposal. The completion of this task requires you to discard the four nuts along with both brackets and the sway bar. The reverse procedure will finish the installation process.