FordParts
My Garage
My Account
Cart
OEM 2003 Mercury Sable Bumper
Bumper Fascia- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Bumpers found
2003 Mercury Sable Impact Bar, Rear Part Number: YF1Z-17906-AB
$63.01 MSRP: $85.75You Save: $22.74 (27%)Product Specifications- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Bar
- Manufacturer Note: Steel
- Position: Rear
- Replaces: XF1Z-17906-AA
- Base No.: 17906
- Item Weight: 15.20 Pounds
- Item Dimensions: 5.8 x 5.6 x 48.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-17906-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Mercury Sable Bumper Cover Part Number: 2F4Z-17K835-BA
$259.55 MSRP: $356.10You Save: $96.55 (28%)Product Specifications- Other Name: Cover
- Manufacturer Note: Paint to match
- Replaces: YF4Z-17K835-BA
- Base No.: 17K835
- Item Weight: 11.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F4Z-17K835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Mercury Sable Impact Bar, Front Part Number: 1F1Z-17757-AA
$88.99 MSRP: $123.11You Save: $34.12 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front; Bar
- Position: Front
- Replaces: YF1Z-17757-AB
- Base No.: 17757
- Item Weight: 14.50 Pounds
- Item Dimensions: 53.7 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Mercury Sable Impact Bar, Rear Part Number: YF1Z-17906-BA
Product Specifications- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Bar
- Position: Rear
- Base No.: 17906
- Item Weight: 14.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-17906-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Mercury Sable Bumper Cover, Front Part Number: 2F4Z-17D957-CA
Product Specifications- Other Name: Bumper Assembly - Front
- Manufacturer Note: Paint to match
- Position: Front
- Base No.: 17D957
- Item Weight: 9.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F4Z-17D957-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Mercury Sable Bumper Cover, Rear Part Number: 2F1Z-17K835-DA
Product Specifications- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: YF1Z-17K835-BA
- Base No.: 17K835
- Item Weight: 10.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-17K835-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Mercury Sable Bumper
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Mercury Sable Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Mercury Sable Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Mercury Sable Bumper Parts Q&A
- Q: How to remove and install the front bumper cover on all on 2003 Mercury Sable?A: The first step for front bumper cover removal on all vehicles requires headlamps removal and vehicle support through lifting. The first step includes unsettling five pin-type retainers located under the chin spoiler and next the air dam can be separated by removing seven screws and three bolts. Unscrew thirteen screws from the splash shields on LH and RH front fenders then dismiss their two pin-type retainers before proceeding to remove the front splash shields. The front bumper cover bolts need to come out while also taking out pin-type retainers and the radiator grille specifically on the Taurus model. The Bumper cover on Sable models needs to be unclipped from the support of the radiator grille opening while fog lamp electrical connectors should only be detached if present. Finish the process by taking out four front bumper cover bolts while directing the bumper cover clip outboard to detach it from the fender before completely removing the front bumper cover. The installation process requires following the opposite steps used for removal.