How to service the Body Control Module on 2004 Ford E-250?

In order to service the Vehicle Security Module, first of all, disconnect the battery, then take the right A-pillar lower trim panel off and unplug electrical connectors. Take out the securing nuts of the module. Upon installation of a new module, you need to reprogram the remote keyless entry transmitters, and reverse the removal process in order to accomplish the installation work.

OEM 2004 Ford E-250 Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Body Control Module found

View related parts
2004 Ford E-250 Control Module Part Number: 4C2Z-15604-AB
Product Specifications
- Other Name: Kit - Alarm/Keyless Lock System; Body Control Module
- Manufacturer Note: Service kit contains 4C2T15K602AA, instruction sheet, and operating label, FROM 4/29/04
- Replaces: 4C2Z-15604-AA
- Base No.: 15604
- Item Weight: 1.00 Pounds
- Item Dimensions: 6.3 x 6.2 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C2Z-15604-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2004 Ford E-250 Body Control Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford E-250 Body Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford E-250 Body Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford E-250 Body Control Module Parts Q&A

Q: How to service the Body Control Module on 2004 Ford E-250?
A: In order to service the Vehicle Security Module, first of all, disconnect the battery, then take the right A-pillar lower trim panel off and unplug electrical connectors. Take out the securing nuts of the module. Upon installation of a new module, you need to reprogram the remote keyless entry transmitters, and reverse the removal process in order to accomplish the installation work.