How to Service and Repair Brake Pads on 2004 Ford E-250?

The service and repair of E-150 brake pads starts with cleaning and removing the brake cylinder filler cap to evaluate brake master cylinder reservoir fluid content. Repair technicians should maintain fluid levels at half before they remove any excess fluid. The brake pad inspection requires you to uninstall the wheel ensemble followed by brake pad assessment for wear signs and contaminants before brake pad installation when needed. The task requires removal of caliper pin bolts so set the rear disc brake caliper beside using suitable maintenance tools to keep the brake hose from harm. Begin by removing the brake pad clips with the brake pads before checking the rear brake disc thickness and replacing it with a new component in cases where the measurement deviates from specifications. To install new brake pads use an appropriate tool to force brake caliper pistons inside the caliper bore. The inspection of rear disc brake caliper leaks needs disassembly if you discover any leaks. A reverse order of the uninstallation steps will finish the installation.

OEM 2004 Ford E-250 Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Pads found

View related parts
2004 Ford E-250 Brake Pads, Rear Part Number: YU2Z-2V200-BA
$45.79 MSRP: $66.65
You Save: $20.86 (32%)
ADD TO CART
Product Specifications
- Other Name: Pad - Brake; Disc Brake Pad Set, Rear
- Position: Rear
- Replaces: 2U2Z-2V200-HB, 2C2Z-2200-AA, 6C2Z-2200-C, 6C2Z-2200-E, XC2Z-2200-AB, BRF-1420, BRSD-802, 6C2Z-2200-D
- Base No.: 2200
- Item Weight: 5.20 Pounds
- Item Dimensions: 2.6 x 5.5 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YU2Z-2V200-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2004 Ford E-250 Rear Pads Part Number: 6C2Z-2200-C
$45.79 MSRP: $66.65
You Save: $20.86 (32%)
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Hardware; Disc Brake Pad Set, Rear; Brake Pads; Kit - Brake Shoe And Lining; Disc Brake Pad Set
- Position: Rear
- Replaced by: YU2Z-2V200-BA
- Base No.: 2200
- Item Weight: 6.70 Pounds
- Item Dimensions: 3.4 x 5.1 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-2200-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2004 Ford E-250 Front Pads Part Number: 4C2Z-2001-CA
Product Specifications
- Other Name: Kit - Brake Shoe; Brake Pads
- Manufacturer Note: Shoe and lining kit(brake) - 1995/2001 - before 2/13/01
- Replaces: 1C2Z-2001-AA
- Base No.: 2001
- Item Weight: 7.00 Pounds
- Item Dimensions: 4.3 x 5.1 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C2Z-2001-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2004 Ford E-250 Brake Pads

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford E-250 Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford E-250 Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford E-250 Brake Pads Parts Q&A

Q: How to Service and Repair Brake Pads on 2004 Ford E-250?
A: The service and repair of E-150 brake pads starts with cleaning and removing the brake cylinder filler cap to evaluate brake master cylinder reservoir fluid content. Repair technicians should maintain fluid levels at half before they remove any excess fluid. The brake pad inspection requires you to uninstall the wheel ensemble followed by brake pad assessment for wear signs and contaminants before brake pad installation when needed. The task requires removal of caliper pin bolts so set the rear disc brake caliper beside using suitable maintenance tools to keep the brake hose from harm. Begin by removing the brake pad clips with the brake pads before checking the rear brake disc thickness and replacing it with a new component in cases where the measurement deviates from specifications. To install new brake pads use an appropriate tool to force brake caliper pistons inside the caliper bore. The inspection of rear disc brake caliper leaks needs disassembly if you discover any leaks. A reverse order of the uninstallation steps will finish the installation.