How to service and repair the rear brake pads on 2005 Ford E-250?

Service and repair the rear brake pads of E-250 and E-350 vehicles starts with checking the brake fluid level inside the reservoir while also filling up to half capacity by draining unwanted fluid from the reservoir. After removing the wheel and tire you should check brake pads for damage and wear signs before replacing the components with new ones. After removing caliper pin bolts you must support the rear disc brake caliper by an adequate method so it cannot dangle from its brake hose before you remove it. You should remove brake pads along with rail clips before checking the rear brake disc thickness and replacing the disc if it does not meet required standards. The technician needs to take apart the caliper if leaks are discovered during its inspection. The last step to complete installation involves performing the opposite actions of removal. You need to exercise careful handling of brake fluid since it presents risks for both personal injuries and painted or plastic surface damage.

OEM 2005 Ford E-250 Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Pads found

View related parts
2005 Ford E-250 Rear Pads Part Number: 6C2Z-2200-C
$45.79 MSRP: $66.65
You Save: $20.86 (32%)
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Hardware; Disc Brake Pad Set, Rear; Brake Pads; Kit - Brake Shoe And Lining; Disc Brake Pad Set
- Position: Rear
- Replaced by: YU2Z-2V200-BA
- Base No.: 2200
- Item Weight: 6.70 Pounds
- Item Dimensions: 3.4 x 5.1 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-2200-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2005 Ford E-250 Brake Pads, Rear Part Number: YU2Z-2V200-BA
$45.79 MSRP: $66.65
You Save: $20.86 (32%)
ADD TO CART
Product Specifications
- Other Name: Pad - Brake; Disc Brake Pad Set, Rear
- Position: Rear
- Replaces: 2U2Z-2V200-HB, 2C2Z-2200-AA, 6C2Z-2200-C, 6C2Z-2200-E, XC2Z-2200-AB, BRF-1420, BRSD-802, 6C2Z-2200-D
- Base No.: 2200
- Item Weight: 5.20 Pounds
- Item Dimensions: 2.6 x 5.5 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YU2Z-2V200-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2005 Ford E-250 Brake Pads, Front Part Number: AU2Z-2V001-D
$46.59 MSRP: $66.65
You Save: $20.06 (31%)
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Front Pads
- Position: Front
- Replaces: 8C3Z-2V001-B, BC3Z-2001-B, BR-1333, BRF-1381, BRF-1069, BRF-1381-A, G2MZ-2V001-B, BRF-1439, 5U2Z-2V001-FA, BC3Z-2001-C, BRF-1069-A, BR-1069, BC3Z-2001-D, BC3Z-2001-F, BRF-1438, BC3Z-2001-A, BC3Z-2001-E
- Item Weight: 6.70 Pounds
- Item Dimensions: 8.9 x 5.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-2V001-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2005 Ford E-250 Brake Pads

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford E-250 Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford E-250 Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford E-250 Brake Pads Parts Q&A

Q: How to service and repair the rear brake pads on 2005 Ford E-250?
A: Service and repair the rear brake pads of E-250 and E-350 vehicles starts with checking the brake fluid level inside the reservoir while also filling up to half capacity by draining unwanted fluid from the reservoir. After removing the wheel and tire you should check brake pads for damage and wear signs before replacing the components with new ones. After removing caliper pin bolts you must support the rear disc brake caliper by an adequate method so it cannot dangle from its brake hose before you remove it. You should remove brake pads along with rail clips before checking the rear brake disc thickness and replacing the disc if it does not meet required standards. The technician needs to take apart the caliper if leaks are discovered during its inspection. The last step to complete installation involves performing the opposite actions of removal. You need to exercise careful handling of brake fluid since it presents risks for both personal injuries and painted or plastic surface damage.